[simpits-tech] Cockpit builders quote....

[Scott]

Jay,
As long as it costs less than an impedance matcher i've seen all over the
pilot's boards and shops (usually 70-80bucks) you can consider this an
advance order... :)

I've also found a gizmo that will supply the mbu-12 with the proper air
supply, being run from a properly filtered regular compressor... all i have
to do is gut it out and install it into the cockpit...

Scott


----- Original Message -----
From: "Joseph Fagner" <falcon4 at sbcglobal.net>
To: "'Simulator Cockpit tech list'" <simpits-tech at simpits.org>
Sent: Thursday, March 22, 2007 4:39 PM
Subject: Re: [simpits-tech] Cockpit builders quote....


> Mostly what I've been selling are the electronics and switches for the
ICP's
> Mike Williams and I developed.  To date I've sold 50 circuit boards for 50
> ICP's along with a number of switches and Beta Innovations MM2 modules to
> run the keys.
>
> I have some new goodies about to come out.  Mike and I are working on the
32
> light caution panel that sits in the right aux of the F-16.  This will be
a
> plug and play module to work along side Beta Innovations Electron Flux as
it
> uses a mux type scanning to light the led's.
>
> I'm also making a break out board that will allow users to plug in their
> real MFD bezels to Beta Innovations MM2 module.  I may even offer to wire
up
> the entire assembly for those that don't want to mess with it.
>
> Finally, I'm making a nice little black box that will allow you to plug in
> your military helmet headphone and mic on one side and out the other side
> right into your sound card.  One box does it all.
>
> And a couple other things in the works.  I can also design and make custom
> circuit boards if you are in the need.
>
> Jay
>
> -----Original Message-----
> From: simpits-tech-bounces at simpits.org
> [mailto:simpits-tech-bounces at simpits.org] On Behalf Of Gene Buckle
> Sent: Thursday, March 22, 2007 4:47 PM
> To: Simulator Cockpit tech list
> Subject: Re: [simpits-tech] Cockpit builders quote....
>
> > Yeah, but I mananged to bridge that fine line between "hobby" and
> > "business".  Turns out I started making some money from the parts I was
> > making and selling.  Now I can write off all this stuff now since I
formed
> > an LLC last year.
> >
> Hehe.  What goodies are you selling Jay?
>
> g.
>
> --
> "I'm not crazy, I'm plausibly off-nominal!"
>
> Proud owner of F-15C 80-0007
> http://www.f15sim.com - The only one of its kind.
>
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech at simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above
page.
> Thanks!
>
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech at simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above
page.  Thanks!