[simpits-tech] Fwd: Company to make panels

[Mike Williams]

Another panel solution  :)

http://viperpit.org/forum/viewtopic.php?t=1116


-----Original Message-----
From: simpits-tech-bounces at simpits.org
[mailto:simpits-tech-bounces at simpits.org] On Behalf Of Brian Sikkema
Sent: Wednesday, January 25, 2006 1:37 PM
To: Simulator Cockpit tech list
Subject: Re: RE: [simpits-tech] Fwd: Company to make panels

FWIW I just played around with the software a bit. I made up the chaff/flare
panel from the F-16. I didn't make it very accurate, just got the
approximate size, added the appropriate number of square and round holes,
and added all the text (though, again, not accurate to size).

For a black anodized panel with white in-filling of the engravings, it was
about $38/panel before any quantity discounts - down to about $30 for 10 or
more - with another break at 20 down to $26.

The same panel but without anodizing or infilling was $26 before any
discounts. For the amount of engraving, not bad at all.

http://www.simpits.org/database/graphics/F16C_panels/F16C_chaff.jpg - the
panel I made.

If anyone's interested, download the free software and give it a shot! It
will give you a quote right there in the program.

Brian

_______________________________________________
Simpits-tech mailing list
Simpits-tech at simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page.
Thanks!