[simpits-tech] Yoke/pedal force

[Johan Nauwelaertz de Agé]

I see, well I have the 8-bit D/A on my Velleman K8000 interface that will be
resolution enough for my yoke feedback connected to airspeed.

Johan

----- Original Message ----- 
From: "Craig Rochester" <johncraigroch at msn.com>
To: "Simulator Cockpit tech list" <simpits-tech at simpits.org>
Sent: Tuesday, January 06, 2004 5:23 PM
Subject: RE: [simpits-tech] Yoke/pedal force


> Hi Johan,
>
> Electronic regulators, aka I/P or E/P transducers are the best.  I tested
a rig with an E/P with
> great results.
>
> The problem for me is finding an affordable D/A converter for driving the
E/P.  I also have an
> altimeter rigged up to operate on pressure rather than vacuum and am
looking for a 14-bit(or better)
> D/A device to output the required resolution.
>
> Craig R.
>
> -----Original Message-----
> From: simpits-tech-bounces at simpits.org
> [mailto:simpits-tech-bounces at simpits.org]On Behalf Of Johan Nauwelaertz
> de Agé
> Sent: Tuesday, January 06, 2004 10:55 AM
> To: Simulator Cockpit tech list
> Subject: Re: [simpits-tech] Yoke/pedal force
>
>
> I'm also working on same idea, but I have found an electronic regulator so
I
> don't need a servo to control pressure.
>
> Johan
>
> ----- Original Message -----
> From: "Bubba" <mysticz28 at swbell.net>
> To: "Simpits" <Simpits-tech at simpits.org>
> Sent: Tuesday, January 06, 2004 12:03 PM
> Subject: [simpits-tech] Yoke/pedal force
>
>
> > I just had another of my ideas. I'm planning on putting pneumatic
> cylinders
> > on the yoke and pedals to give more resistance, then using a needle
valve
> > between the cylinders to adjust the resistance. How about controlling
that
> > valve with a servo that's controlled by airspeed so the resistance
> increases
> > with speed?
> > --
> > Steve
> > mysticz28 at swbell.net
> > He who seeks will find, and he who knocks will be let in.
> >
> >
> > _______________________________________________
> > Simpits-tech mailing list
> > Simpits-tech at simpits.org
> > http://www.simpits.org/mailman/listinfo/simpits-tech
> > To unsubscribe, please see the instructions at the bottom of the above
> page.  Thanks!
> >
>
>
>
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech at simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above
page.  Thanks!
>
>
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech at simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above
page.  Thanks!
>