[simpits-tech] To Marv - Status and the I/ITSEC Show

[Steve Wilson]

Re: [simpits-tech] To Marv - Status and the I/ITSEC ShowThanks, Craig.... I'll go have a looksee.  Much appreciated.

Steve
  ----- Original Message ----- 
  From: MSN2 
  To: Simulator Cockpit tech list 
  Sent: Monday, January 05, 2004 4:13 AM
  Subject: RE: [simpits-tech] To Marv - Status and the I/ITSEC Show


  Steve,

  We've been plugging away at the SSC project.  Dave started cutting metal last week.  Here's where we post our progress: http://viperpit.org/forum/viewtopic.php?t=104&postdays=0&postorder=asc&start=60

  Craig R.
    -----Original Message-----
    From: simpits-tech-bounces at simpits.org [mailto:simpits-tech-bounces at simpits.org]On Behalf Of Steve Wilson
    Sent: Monday, January 05, 2004 1:32 AM
    To: Simulator Cockpit tech list
    Subject: Re: [simpits-tech] To Marv - Status and the I/ITSEC Show


    Mike - Nothing from Craig or Dave yet.  Any hope?

    Steve W.
      ----- Original Message ----- 
      From: Mike Williams 
      To: Simulator Cockpit tech list 
      Sent: Monday, December 15, 2003 6:02 PM
      Subject: RE: [simpits-tech] To Marv - Status and the I/ITSEC Show


      Watch for an announcement from Bricklayer or Dave 
      , (SSC, LVDT),the cost will be whatever you have to spend to get it done yourself, the drawings will be released to the community, I'll
      leave it to Craig or Dave for further information. 
        -----Original Message-----
        From: simpits-tech-bounces at simpits.org [mailto:simpits-tech-bounces at simpits.org]On Behalf Of Steve Wilson
        Sent: Monday, December 15, 2003 6:48 PM
        To: Simulator Cockpit tech list
        Subject: Re: [simpits-tech] To Marv - Status and the I/ITSEC Show


        Hehe, shocked right out of my project.  Gawd, I asked for it!  But now you're talking about another development thread using different technology and materials.  Okay, thanks, I needed to know, and I guess it's not in my picture, no matter which way you go.  I can do Hall effect too, I was just hoping for proven force sensitive technology.  Sounds like your real customer is the USAF.  Bummer.   I hate to say it, but you can take me off your list.  Sorry, dude.

        Steve
          ----- Original Message ----- 
          From: Marv De Beque 
          To: Simulator Cockpit tech list 
          Sent: Monday, December 15, 2003 4:32 PM
          Subject: Re: [simpits-tech] To Marv - Status and the I/ITSEC Show


          Okay, here is the sticker shock.

             Quantity 12 pricing is approximately $2500.00 each.

          Realistically, I am looking at some sort of lower end model for the sim crowd.  It won't use LVDTs, but probably some other technology like Hall Effect and the stick movement will probably be a little more exaggerated than the 0.150" the current base has to accept that type of sensor.  The base will probably need to be a composite material rather than solid aluminum.

          Marv


          On 12/15/03 6:12 PM, "Steve Wilson" <mafsix at hotmail.com> wrote:


            Great news that the stick base is so good.  Can you at least give us an idea of the price range +/- a couple hundred and a realistic idea as to when?   "We've already heard going to be expensive."  Not to ding ya, Marv, I'm really going to be happy with the base, but c'mon, you've had the sucker up to final spec for over six months now.  I'm getting close to construction on my (I swear) last cockpit attempt, and to be perfectly frank, with the possibility of this base, the pit is going to be built around it.  I'm trying to figure out my options....

            Steve

            ----- Original Message ----- 

              From: Marv De Beque <mailto:mdebeque at woh.rr.com>  
              To: Simulator Cockpit tech list <mailto:simpits-tech at simpits.org>  
              Sent: Monday, December 15, 2003 3:55 PM
              Subject: Re: [simpits-tech] To Marv - Status and the I/ITSEC Show


              The side stick base was an absolute hit at the show last week.  Lockheed and L3 were all over it.  Lockheed sent 6 real F-16 pilots to test it out and all left with two thumbs up.  The bad news is pricing is going to be really expensive.  My cost is very high to make these.



--------------------------------------------------------------------
            _______________________________________________
            Simpits-tech mailing list
            Simpits-tech at simpits.org
            http://www.simpits.org/mailman/listinfo/simpits-tech
            To unsubscribe, please see the instructions at the bottom of the above page.  Thanks!





----------------------------------------------------------------------


          _______________________________________________
          Simpits-tech mailing list
          Simpits-tech at simpits.org
          http://www.simpits.org/mailman/listinfo/simpits-tech
          To unsubscribe, please see the instructions at the bottom of the above page.  Thanks!


--------------------------------------------------------------------------


      _______________________________________________
      Simpits-tech mailing list
      Simpits-tech at simpits.org
      http://www.simpits.org/mailman/listinfo/simpits-tech
      To unsubscribe, please see the instructions at the bottom of the above page.  Thanks!


------------------------------------------------------------------------------


  _______________________________________________
  Simpits-tech mailing list
  Simpits-tech at simpits.org
  http://www.simpits.org/mailman/listinfo/simpits-tech
  To unsubscribe, please see the instructions at the bottom of the above page.  Thanks!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.simpits.org/pipermail/simpits-tech/attachments/20040105/39d34a35/attachment.html