[simpits-tech] rotary encoder
RickInNoCal at aol.com
RickInNoCal at aol.com
Thu Feb 5 19:46:32 PST 2004
Sorry, but I have to differ.
I even stuck one on a 'scope to check, and at higher turn speeds, the switch
simply doesn't 'make' on every click - the same mechanism that makes the
spring skip the 'wrong' contact results in the spring skipping the 'right' contact
if it's moving too fast.
Richard
> On Friday 06 February 2004 00:04, RickInNoCal at aol.com wrote:
> >If you can, though - try to get your hands on a sample before buying a
> >bunch - a lot of the people who got them here were dissatisfied with the
> >feel and the need to turn them fairly slowly so as not to make them
> >"missfire".
>
> In a message dated 2/5/04 4:23:38 PM Pacific Standard Time, mail at prbox.com
> writes:
> Misfire? Unless they are a _really_ bad switch unit the switch won't
> misfire,
> just that the controller reading the switch is too slow in reading the
> outputs from the switch.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.simpits.org/pipermail/simpits-tech/attachments/20040205/28f77806/attachment.html
More information about the Simpits-tech
mailing list