[simpits-tech] Power Supply

[Frank Riedel]

Get a new PSU
!!!
;o) - Frank


----- Original Message -----
From: "Robert Bibber" <robert at karobsiberians.com>
To: "Simulator Cockpit tech list" <simpits-tech at simpits.org>
Sent: Wednesday, September 24, 2003 7:39 PM
Subject: Re: [simpits-tech] Power Supply


OK, I found a resistor on an old circuit board - used soldering iron to very
gently remove it, hooked it up - still NADT! (Not A Damn Thing)

Then -- oops! I dropped the resistor - where did it go? Damn! Those things
are tiny!

:-)


Rob Bibber
Karob Siberian Sleddogs
http://www.karobsiberians.com
----- Original Message -----
From: "Stig Joergensen" <stig.joergensen at clearsky.dk>
To: "Simulator Cockpit tech list" <simpits-tech at simpits.org>
Sent: Wednesday, September 24, 2003 1:15 PM
Subject: RE: [simpits-tech] Power Supply



A resistor is typical a round thingie with color marks expressing the
value


Found this site with google :

http://www.jct.ac.il/electronics/webprogs/resistor/resistor.html


/Stig


> -----Original Message-----
> From: Robert Bibber [mailto:robert at karobsiberians.com]
> Sent: 24. september 2003 19:08
> To: Simulator Cockpit tech list
> Subject: Re: [simpits-tech] Power Supply
>
>
> I'm still pretty new to this electronics stuff :-(
> What does a 1k ohm resistor look like? I might be able to
> borrow one from old junk.
>
> Rob Bibber
> Karob Siberian Sleddogs
> http://www.karobsiberians.com
> ----- Original Message -----
> From: "Stig Joergensen" <stig.joergensen at clearsky.dk>
> To: "Simulator Cockpit tech list" <simpits-tech at simpits.org>
> Sent: Wednesday, September 24, 2003 12:54 PM
> Subject: RE: [simpits-tech] Power Supply
>
>
> Try to load the PWRGOOD with a resistance (a 1k ohm should od
> the trick)
> connected to ground
>
> /Stig
>
>
> > -----Original Message-----
> > From: Gene Buckle [mailto:geneb at deltasoft.com]
> > Sent: 24. september 2003 18:51
> > To: Simulator Cockpit tech list
> > Subject: Re: [simpits-tech] Power Supply
> >
> >
> > > I connect PWRGOOD to Ground and nothing happens. I connect PSON to
> > > ground and the fan spins for half a second then stops. I've tried
> > > various combinations with no effect.
> > >
> > That's weird.  Plug something into the drive connectors so
> > the supply will
> > have a load on it and then try turning it on again.  That's
> > the only thing
> > I can think of - it's shutting down due to lack of a load.
> >
> > g.
> >
> > _______________________________________________
> > Simpits-tech mailing list
> > Simpits-tech at simpits.org
> > http://www.simpits.org/mailman/listinfo/simpits-tech
> > To unsubscribe, please see the instructions at the bottom of
> > the above page.  Thanks!
> >
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech at simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of
> the above page.  Thanks!
>
>
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech at simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of
> the above page.  Thanks!
>
_______________________________________________
Simpits-tech mailing list
Simpits-tech at simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page.
Thanks!


_______________________________________________
Simpits-tech mailing list
Simpits-tech at simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page.
Thanks!