[simpits-tech] Power Supply

[Robert Bibber]

I'm still pretty new to this electronics stuff :-(
What does a 1k ohm resistor look like? I might be able to borrow one from old junk.

Rob Bibber
Karob Siberian Sleddogs
http://www.karobsiberians.com
----- Original Message ----- 
From: "Stig Joergensen" <stig.joergensen at clearsky.dk>
To: "Simulator Cockpit tech list" <simpits-tech at simpits.org>
Sent: Wednesday, September 24, 2003 12:54 PM
Subject: RE: [simpits-tech] Power Supply


Try to load the PWRGOOD with a resistance (a 1k ohm should od the trick)
connected to ground

/Stig


> -----Original Message-----
> From: Gene Buckle [mailto:geneb at deltasoft.com]
> Sent: 24. september 2003 18:51
> To: Simulator Cockpit tech list
> Subject: Re: [simpits-tech] Power Supply
> 
> 
> > I connect PWRGOOD to Ground and nothing happens. I connect PSON to
> > ground and the fan spins for half a second then stops. I've tried
> > various combinations with no effect.
> >
> That's weird.  Plug something into the drive connectors so 
> the supply will
> have a load on it and then try turning it on again.  That's 
> the only thing
> I can think of - it's shutting down due to lack of a load.
> 
> g.
> 
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech at simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of 
> the above page.  Thanks!
> 
_______________________________________________
Simpits-tech mailing list
Simpits-tech at simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page.  Thanks!