[simpits-tech] 4" LCD

[Frank Riedel]

Look here !
www.rezultat.dk/f16

If you mount the display a little more deep behind the rest (in my project)
i have the room for those disp. and thats what im going to do !

Frank


----- Original Message -----
From: "Erwin Neyt" <erwin at sim-instruments.com>
To: "Simulator Cockpit tech list" <simpits-tech at simpits.org>
Sent: Wednesday, October 15, 2003 6:54 PM
Subject: Re: [simpits-tech] 4" LCD


> If your looking to cover an area of 4" square, you'll be looking for a
6.3"
> or 6.4" LCD, presuming they are 4:3 aspect ratio (which almost all are)
>
> Problem here is what to do with the excess (1 quarter) display area. There
> is not much room behind the panel.
>
> Erwin.
>
>
> ----- Original Message -----
> From: "Marv De Beque" <mdebeque at woh.rr.com>
> To: "Simulator Cockpit tech list" <simpits-tech at simpits.org>
> Sent: Wednesday, October 15, 2003 12:57 PM
> Subject: Re: [simpits-tech] 4" LCD
>
>
> > Not clear.  4" is probably diagonal and that is way too small for a real
> > MFD.  You need to know the exact active display area.
> >
> >
> >
> >
> > On 10/15/03 5:15 AM, "Ido Dekkers" <idekkers at clicksoftware.com> wrote:
> >
> > >
> > >
> > >
> > >
> > >
> > > will these do for the MFD's ? they are 480 x 234 is this enough or to
> low ?
> > >
> > > Ido
> > >
> > >
> > >
> > >            "Brian Sikkema"
> > >            <hangr18 at hotmail.
> > >            com>
To
> > >            Sent by:                  "simpits tech"
> > >            simpits-tech-boun         <simpits-tech at simpits.org>
> > >            ces at simpits.org
cc
> > >
> > >
Subject
> > >            10/09/2003 19:23          [simpits-tech] 4" LCD
> > >
> > >
> > >            Please respond to
> > >            Simulator Cockpit
> > >                tech list
> > >            <simpits-tech at sim
> > >                pits.org>
> > >
> > >
> > >
> > >
> > >
> > >
> > > Just saw this, on sale for $199... who knows, might be a good deal for
> > > someone. Set up for testing CCTV cameras, so you know the video inputs
> are
> > > easy to work with:
> > >
> > >
>
http://mcm.newark.com/NewarkWebCommerce/mcm/en_US/support/catalog/productDet
> ai
> > > l.jsp?id=82-4305
> > >
> > > Brian_______________________________________________
> > > Simpits-tech mailing list
> > > Simpits-tech at simpits.org
> > > http://www.simpits.org/mailman/listinfo/simpits-tech
> > > To unsubscribe, please see the instructions at the bottom of the above
> > > page.  Thanks!
> > >
> > > _______________________________________________
> > > Simpits-tech mailing list
> > > Simpits-tech at simpits.org
> > > http://www.simpits.org/mailman/listinfo/simpits-tech
> > > To unsubscribe, please see the instructions at the bottom of the above
> page.
> > > Thanks!
> >
> > _______________________________________________
> > Simpits-tech mailing list
> > Simpits-tech at simpits.org
> > http://www.simpits.org/mailman/listinfo/simpits-tech
> > To unsubscribe, please see the instructions at the bottom of the above
> page.  Thanks!
>
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech at simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above
page.  Thanks!