[simpits-tech] f 16 rudder pedals
funhouse24
simpits-tech@simpits.org
Sat, 4 Jan 2003 14:14:09 -0000
Hello Jonas,
I think the cost will put most people off of wanting to
buy them , the linear potentiometers i used cost £135.00 each, times that by
4 and you'll see what i mean . The actual materials used , HE30 TF
aluminium and the seamless hollow steel bar for the guide rails didn't
actually cost that much .I have had a couple of enquiries from the group
asking if i would start selling them, that's something i would have to
think about . my set were machined from solid bar, to make sets to sell i
would make patterns and cast my own to speed up build time . do you have any
photo's of the pedals you would want ? .
all the best
Dave
----- Original Message -----
From: "Jonas Frazier" <spitpilot40@hotmail.com>
To: <simpits-tech@simpits.org>
Sent: Saturday, January 04, 2003 4:41 AM
Subject: Re: [simpits-tech] f 16 rudder pedals
What about some commercial airliner, 747, pedals for example? WOuld you
make a set of these for me? I'd pay you for them! Pretty please?!
JOnas
>From: "funhouse24" <funhouse24@supanet.com>
>Reply-To: simpits-tech@simpits.org
>To: <simpits-tech@simpits.org>
>Subject: Re: [simpits-tech] f 16 rudder pedals
>Date: Fri, 3 Jan 2003 22:08:09 -0000
>
>Hello mike ,thanks for your comments,the pedals are machined from aluminium
>, with the guide rails being made of hollow bar, I am lucky enough to have
>my own workshop and machines. the end frames took about 20 hours each ,the
>footpads about the same. the cost of materials was not that much, the most
>expensive parts being the linear potentiometers they come in at £135.00
>each,the return spring pressure on the rudder is 20 Kgf the toe brakes are
>15 Kgf after talking to Martin "Pegasus" I will increase the toe brakes to
>18 Kgf. I have had some enquires as to making sets, and will give it some
>thought, I would make patterns for the two frames and the foot pads and
>cast my own to speed up build time. the pedals weigh 7 Kg and work with
>the cougar set-up very well. hope this has been of some help to you,
>happy new year you
>all the best
>Dave
>
> Original Message -----
> From: Mike Williams
> To: simpits-tech@simpits.org
> Sent: Friday, January 03, 2003 8:14 PM
> Subject: RE: [simpits-tech] f 16 rudder pedals
>
>
> Those are very nice looking pedals Dave, can you tell us how you made
>them, its evident you have access to a machine shop, any thought of making
>these for others?
> -----Original Message-----
> From: simpits-tech-admin@simpits.org
>[mailto:simpits-tech-admin@simpits.org]On Behalf Of funhouse24
> Sent: Friday, January 03, 2003 2:38 PM
> To: simpits-tech@simpits.org
> Subject: Re: [simpits-tech] f 16 rudder pedals
>
>
>
> ----- Original Message -----
> From: funhouse24
> To: simpits-tech@simpits.org
> Sent: Friday, January 03, 2003 5:05 PM
> Subject: Re: [simpits-tech] f 16 rudder pedals
>
>
> Hi Chris, the pic's have now been uploaded, and can be seen at
> www.simpits.org/fileproc/allfiles.php hope you like them
>
> all the best Dave
> ----- Original Message -----
> From: Chris Crowley
> To: simpits-tech@simpits.org
> Sent: Friday, January 03, 2003 2:06 AM
> Subject: RE: [simpits-tech] f 16 rudder pedals
>
>
> Uploaded where? Can you give a link?
>
> Chris Crowley
>
> -----Original Message-----
> From: simpits-tech-admin@simpits.org
>[mailto:simpits-tech-admin@simpits.org]On Behalf Of funhouse24
> Sent: Thursday, January 02, 2003 1:18 PM
> To: simpits-tech@simpits.org
> Subject: [simpits-tech] f 16 rudder pedals
>
>
> Hi guy's
> Happy New Year to all,
> I have just finished making a set of rudder pedals for my pit
>and have uploaded a couple of pic's if anyone's interested. Dimensionally
>they be slightly incorrect as they were scaled from a couple of photo's,
>
> all the best
> Dave
_________________________________________________________________
Protect your PC - get McAfee.com VirusScan Online
http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page.
Thanks!