[simpits-tech] Wiring of POT and EPL

[Marv De Beque]

Ah, rotary encoder is different.  You don't need the push button since it
only mechanically couples the knob to the synchro.



On 2/28/03 2:15 PM, "Frank Riedel" <frank@rezultat.dk> wrote:

> I now it's a rotary encoder... and it is what i use... with a push button...
> 
> In other words.. i need help on connect POT and ENCODERS to the EPIC
> and the code for it... - help please ;o)
> 
> Frank
> 
> 
> ----- Original Message -----
> From: "Marv De Beque" <mdebeque@woh.rr.com>
> To: <simpits-tech@simpits.org>
> Sent: Friday, February 28, 2003 6:30 PM
> Subject: Re: [simpits-tech] Wiring of POT and EPL
> 
> 
>> Bad news.  That "pot" is really a synchro and rotates continuously with no
>> mechanical stops.
>> 
>> The "PUSH" command is for engaging a mechanical spring loaded gear that
>> connects the shaft of the synchro with the shaft of the knob when it is
>> pushed down.  In other words, you push it in so it engages with the
> synchro.
>> If you don't push it, it simply turns and does no action on anything.
>> 
>> On 2/28/03 11:30 AM, "Frank Riedel" <frank@rezultat.dk> wrote:
>> 
>>> Hi All !
>>> Will someone please help me...
>>> show (on this pic) how to wire the POT and the EPLcode for this POT ???
>>> 
>>> Fly Well
>>> 
>>> Frank
>>> 
>> 
>> _______________________________________________
>> Simpits-tech mailing list
>> Simpits-tech@simpits.org
>> http://www.simpits.org/mailman/listinfo/simpits-tech
>> To unsubscribe, please see the instructions at the bottom of the above
> page.  Thanks!
> 
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech@simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above page.
> Thanks!