[simpits-tech] rear projection screens
Brian Sikkema
hangr18 at hotmail.com
Sat Dec 20 15:56:43 PST 2003
Wow! That is really cool. Thanks for the suggestion!
Brian
----- Original Message -----
From: RickInNoCal at aol.com
To: simpits-tech at simpits.org
Sent: Saturday, December 20, 2003 2:56 PM
Subject: Re: [simpits-tech] rear projection screens
In a message dated 12/20/03 8:58:20 AM Pacific Standard Time, hangr18 at hotmail.com writes:
I'd LOVE to do a setup like this someday, but building a giant
curved mirror is gonna be a bitch....
Well, actually, no, not really. The mirror needs to be curved in two dimensions, not just one, which actually makes it easier.
To make, for example, an 8' diameter curved mirror, make a 8' diameter wooden disk out of a couple of sheets of plywood, with a lip about 6" high all round the edge. Paint the inside thoroughly with epoxy paint to make it airtight.
Drill a hole in the lip at some point and epoxy in a piece of plastic tubing. Cover the top of this dish you've made with a thin sheet of shiny mylar - the stuff they make helium balloons out of - pulled as tight and wrinkle free as you can get it, and carefully glued all the way round. Then just use a hand held vacumn pump (The sort of thing you use to bleed your brakes) to pull a slight vacumn inside the dish. This will suck the mylar down into a perfectly parabolic concave shape. You adjust the focal length by adjusting the vacumn.
I used this technique at high school....um, "some" years ago.. with clear film and silver spray paint (No silver mylar back then!) to make a projection telescope to show a large image of a lunar eclipse for an astronomy club open night. Our mirror was 16' in diameter, and 2' deep, and it worked no problems. We weren't perfectly airtight, so we had to keep tweaking the vacumn, but that was probably a workmanship issue.
Richard
------------------------------------------------------------------------------
_______________________________________________
Simpits-tech mailing list
Simpits-tech at simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.simpits.org/pipermail/simpits-tech/attachments/20031220/bd19633f/attachment.html
More information about the Simpits-tech
mailing list