[simpits-tech] (no subject)
Roy Coates
simpits-tech@simpits.org
Wed, 20 Aug 2003 18:17:29 +0100 (BST)
On Wed, 20 Aug 2003, Robert Bibber wrote:
> OK, I looked up PIHER encoders. I am familiar with computers (I'm a
> programmer/network admin by trade), but my knowledge of electronics is
> limited so far. Please educate me on how I would use one of these
> encoders in my application.
>
No problem, The device has 3 connections marked A,B and C.
C is common - connect to the KE72 common.
A and B go to seperate inputs on the KE72.
Job done!
As the device is rotated, it will 'pulse' either the A or B pin depending
on the direction of rotation.
hth,
Roy.