[simpits-tech] Tech Help Needed: Aircraft Power

[Stig Joergensen]

Roy,

Why not break each powerbus after the PDU with a switch, or perhaps a
removeable fuse - that way, you can later install  the fuse when you
need the powerbus and keep it all together and use the original
design...

/Stig


-----Original Message-----
From: Roy Coates [mailto:roy@flightlab.liv.ac.uk] 
Sent: 18. august 2003 18:44
To: simpits-tech@simpits.org
Subject: Re: [simpits-tech] Tech Help Needed: Aircraft Power

On Mon, 18 Aug 2003, Gene Buckle wrote:

> > 1. There are 12 seperate busbars.
> > 2. There is a Power Distribution Unit which connects the various
busbars
> > together depending on power and/or switch conditions.
> >
> > so...
> >
> > If I remove the PDU, I should end up with 12 seperate (manageable)
power
> > busbars.
> >
>
> Why not just leave the PDU in place?
>

Because I don't want to apply power for maybe the cabin lighting, and
have
something like the avionics essential bus go live too.

We need power for the trivial items like lighting, PA, etc but all the
avionics are dead - replaced by sim stuff.

I guess I need to disable the inverters too ;)

Roy.


_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above
page.  Thanks!