AW: [simpits-tech] F16 panels mounting
Newsletter2BS
simpits-tech@simpits.org
Tue, 22 Oct 2002 21:12:56 +0200
This is a multi-part message in MIME format.
------=_NextPart_000_001C_01C27A0F.CA861C40
Content-Type: text/plain;
charset="iso-8859-1"
Content-Transfer-Encoding: 8bit
Hello Albert,
with regards to the lighting - have you already checked Marting "Pegasus"
Schmidt's solution of backlightning. He used black varnished acrylic glass
mounted on a metall sheet. The labeling was done by engraving the caracters
into the coated glass. For night-flights, he drilled some holes into the
backsite with a depth of approx. 6mm and fed them with LED's (less power
requirement than bulbs and less heat-expansion)
Check his site for further information about this solution:
http://www.xflight.de
Greetings
Ben "Interceptor" Schup
BAVARIAN WILDCATS 401th VFS
-----Ursprüngliche Nachricht-----
Von: simpits-tech-admin@simpits.org
[mailto:simpits-tech-admin@simpits.org]Im Auftrag von Albert Yung
Gesendet: Sonntag, 22. Oktober 2000 01:58
An: simpits-tech@simpits.org
Betreff: Re: [simpits-tech] F16 panels mounting
Thanks Ben, Marv and Steve for the reply,
a 2 mm gap sounds right. I suppose the tiny gap Marv mentioned is a good
way to judge. The only issue is if I cut out the panel and leave a tiny gap
for the paper to slip through, light sources which I will use beneath the
panels itself will also come through. I suppose in the real thing that does
not happen due to the fact that the panels are backlidded differently?
I have decided to experiment with a couple of low power/ low heat light
bulbs. Similar concept to a light table. "Huston, we might have a problem"
:) let me have another think before I start chopping away.
Cheers,
Albert
Sydney, Oztralia
----- Original Message -----
From: Newsletter2BS
To: simpits-tech@simpits.org
Sent: Tuesday, October 22, 2002 5:30 AM
Subject: AW: [simpits-tech] F16 panels mounting
Hello Albert,
I can't confirm your question for sure, but I checked all my pictures I
have from the Viper-pit and all this stuff are showing small gap between the
left-side panels (horizontally and vertically) - I considered the distances
with 2mm within my drawings.
Greetings
Ben "Interceptor" Schup
BAVARIAN WILDCATS 401th VFS
-----Ursprüngliche Nachricht-----
Von: simpits-tech-admin@simpits.org
[mailto:simpits-tech-admin@simpits.org]Im Auftrag von Albert Yung
Gesendet: Samstag, 21. Oktober 2000 20:02
An: simpits-tech@simpits.org
Betreff: [simpits-tech] F16 panels mounting
Hi all F16 pitters,
I run into a small problem...or rather a small question mark in my
head tonight.
The left side panel in the pit...each "individual" black panels for
all the switches and knobs...are they mounted "edge to edge" next to each
other? or do they have a "small" gap inbetween?
Cos' from the photo resources i have seen.They do appears to. However,
in a black and white plan (that 2mb BMP file) it looked as if they had a
small space inbetween them.
Can anyone verify that?
Many thanks.
Albert
Sydney, Austraila
------=_NextPart_000_001C_01C27A0F.CA861C40
Content-Type: text/html;
charset="iso-8859-1"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content=3D"text/html; charset=3Diso-8859-1" =
http-equiv=3DContent-Type>
<META content=3D"MSHTML 5.00.2920.0" name=3DGENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=3D#ffffff>
<DIV><FONT color=3D#0000ff face=3DArial size=3D2><SPAN =
class=3D848451718-22102002>Hello=20
Albert,</SPAN></FONT></DIV>
<DIV><FONT color=3D#0000ff face=3DArial size=3D2><SPAN=20
class=3D848451718-22102002></SPAN></FONT> </DIV>
<DIV><FONT color=3D#0000ff face=3DArial size=3D2><SPAN =
class=3D848451718-22102002>with=20
regards to the lighting - have you already checked Marting "Pegasus" =
Schmidt's=20
solution of backlightning. He used black varnished acrylic glass =
mounted on=20
a metall sheet. The labeling was done by engraving the caracters =
into the=20
coated glass. For night-flights, he drilled some holes into the backsite =
with a=20
depth of approx. 6mm and fed them with LED's (less =
power requirement than=20
bulbs and less heat-expansion)</SPAN></FONT></DIV>
<DIV> </DIV>
<DIV><FONT color=3D#0000ff face=3DArial size=3D2><SPAN =
class=3D848451718-22102002>Check=20
his site for further information about this solution: <A=20
href=3D"http://www.xflight.de">http://www.xflight.de</A></SPAN></FONT></D=
IV>
<DIV><FONT color=3D#0000ff face=3DArial size=3D2><SPAN=20
class=3D848451718-22102002></SPAN></FONT> </DIV>
<DIV><FONT color=3D#0000ff face=3DArial size=3D2><SPAN=20
class=3D848451718-22102002>Greetings</SPAN></FONT></DIV>
<DIV><FONT color=3D#0000ff face=3DArial size=3D2><SPAN=20
class=3D848451718-22102002></SPAN></FONT> </DIV>
<DIV><FONT color=3D#0000ff face=3DArial size=3D2>
<DIV><FONT color=3D#0000ff face=3DArial size=3D2><SPAN =
class=3D648071919-21102002>Ben=20
"Interceptor" Schup</SPAN></FONT></DIV>
<DIV><FONT color=3D#0000ff face=3DArial size=3D2><SPAN=20
class=3D648071919-21102002>BAVARIAN WILDCATS 401th =
VFS</SPAN></FONT></FONT><SPAN=20
class=3D848451718-22102002></SPAN><FONT face=3DTahoma><BR><FONT =
size=3D2><SPAN=20
class=3D848451718-22102002><FONT color=3D#0000ff=20
face=3DArial> </FONT></SPAN>-----Urspr=FCngliche =
Nachricht-----<BR><B>Von:</B>=20
simpits-tech-admin@simpits.org =
[mailto:simpits-tech-admin@simpits.org]<B>Im=20
Auftrag von </B>Albert Yung<BR><B>Gesendet:</B> Sonntag, 22. Oktober =
2000=20
01:58<BR><B>An:</B> simpits-tech@simpits.org<BR><B>Betreff:</B> Re:=20
[simpits-tech] F16 panels mounting<BR><BR></FONT></DIV></DIV>
<BLOCKQUOTE style=3D"MARGIN-RIGHT: 0px"></FONT>
<DIV><FONT face=3DArial size=3D2>Thanks Ben, Marv and Steve for the=20
reply,</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>a 2 mm gap sounds right. I suppose =
the tiny=20
gap Marv mentioned is a good way to judge. The only issue is if I =
cut out=20
the panel and leave a tiny gap for the paper to slip through, light =
sources=20
which I will use beneath the panels itself will also come through. I =
suppose=20
in the real thing that does not happen due to the fact that the panels =
are=20
backlidded differently?</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>I have decided to experiment with a =
couple of low=20
power/ low heat light bulbs. Similar concept to a light table. =
"Huston, we=20
might have a problem" :) let me have another think before I start =
chopping=20
away.</FONT></DIV>
<DIV><BR><FONT face=3DArial size=3D2>Cheers,</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>Albert</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Sydney, Oztralia</FONT></DIV>
<DIV> </DIV>
<DIV> </DIV>
<BLOCKQUOTE=20
style=3D"BORDER-LEFT: #000000 2px solid; MARGIN-LEFT: 5px; =
MARGIN-RIGHT: 0px; PADDING-LEFT: 5px; PADDING-RIGHT: 0px">
<DIV style=3D"FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV=20
style=3D"BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>=20
<A href=3D"mailto:Newsletter2BS@yahoo.de"=20
title=3DNewsletter2BS@yahoo.de>Newsletter2BS</A> </DIV>
<DIV style=3D"FONT: 10pt arial"><B>To:</B> <A=20
href=3D"mailto:simpits-tech@simpits.org"=20
title=3Dsimpits-tech@simpits.org>simpits-tech@simpits.org</A> </DIV>
<DIV style=3D"FONT: 10pt arial"><B>Sent:</B> Tuesday, October 22, =
2002 5:30=20
AM</DIV>
<DIV style=3D"FONT: 10pt arial"><B>Subject:</B> AW: [simpits-tech] =
F16 panels=20
mounting</DIV>
<DIV><BR></DIV>
<DIV><FONT color=3D#0000ff face=3DArial size=3D2><SPAN=20
class=3D648071919-21102002>Hello Albert,</SPAN></FONT></DIV>
<DIV><FONT color=3D#0000ff face=3DArial size=3D2><SPAN=20
class=3D648071919-21102002></SPAN></FONT> </DIV>
<DIV><FONT color=3D#0000ff face=3DArial size=3D2><SPAN =
class=3D648071919-21102002>I=20
can't confirm your question for sure, but I checked all my=20
pictures I have from the Viper-pit and all this stuff are =
showing small=20
gap between the left-side panels (horizontally and vertically) -=20
I considered the distances with 2mm within my=20
drawings.</SPAN></FONT></DIV>
<DIV><FONT color=3D#0000ff face=3DArial size=3D2><SPAN=20
class=3D648071919-21102002></SPAN></FONT> </DIV>
<DIV><FONT color=3D#0000ff face=3DArial size=3D2><SPAN=20
class=3D648071919-21102002>Greetings</SPAN></FONT></DIV>
<DIV><FONT color=3D#0000ff face=3DArial size=3D2><SPAN=20
class=3D648071919-21102002></SPAN></FONT> </DIV>
<DIV><FONT color=3D#0000ff face=3DArial size=3D2><SPAN=20
class=3D648071919-21102002>Ben "Interceptor" =
Schup</SPAN></FONT></DIV>
<DIV><FONT color=3D#0000ff face=3DArial size=3D2><SPAN=20
class=3D648071919-21102002>BAVARIAN WILDCATS 401th =
VFS</SPAN></FONT></DIV>
<BLOCKQUOTE style=3D"MARGIN-RIGHT: 0px">
<DIV align=3Dleft class=3DOutlookMessageHeader dir=3Dltr><FONT =
face=3DTahoma=20
size=3D2>-----Urspr=FCngliche Nachricht-----<BR><B>Von:</B>=20
simpits-tech-admin@simpits.org=20
[mailto:simpits-tech-admin@simpits.org]<B>Im Auftrag von =
</B>Albert=20
Yung<BR><B>Gesendet:</B> Samstag, 21. Oktober 2000 =
20:02<BR><B>An:</B>=20
simpits-tech@simpits.org<BR><B>Betreff:</B> [simpits-tech] F16 =
panels=20
mounting<BR><BR></DIV></FONT>
<DIV><FONT face=3DArial size=3D2>Hi all F16 pitters,</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>I run into a small problem...or =
rather a=20
small question mark in my head tonight.</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>The left side panel in the =
pit...each=20
"individual" black panels for all the switches and knobs...are =
they=20
mounted "edge to edge" next to each other? or do they have a =
"small" gap=20
inbetween?</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>Cos' from the photo resources i =
have=20
seen.They do appears to. However, in a black and white plan (that =
2mb BMP=20
file) it looked as if they had a small space inbetween =
them.</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>Can anyone verify =
that?</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>Many thanks.</FONT></DIV>
<DIV> </DIV>
<DIV><FONT face=3DArial size=3D2>Albert</FONT></DIV>
<DIV><FONT face=3DArial size=3D2>Sydney, Austraila</FONT></DIV>
=
<DIV> </DIV></BLOCKQUOTE></BLOCKQUOTE></BLOCKQUOTE></BODY></HTML>
------=_NextPart_000_001C_01C27A0F.CA861C40--
__________________________________________________________________
Gesendet von Yahoo! Mail - http://mail.yahoo.de
Möchten Sie mit einem Gruß antworten? http://grusskarten.yahoo.de