[simpits-tech] Projectors
rob
simpits-tech@simpits.org
Thu, 03 Oct 2002 15:58:55 -0500
This is a multi-part message in MIME format.
--Boundary_(ID_lUJjJ/Av2AJC9UX7erPwXA)
Content-type: text/plain; charset=iso-8859-1
Content-transfer-encoding: 7BIT
bulbs run from 400 to 700 dollars! ouch! I only run my projector when i'm sitting behind the yoke. By doing it that way, I hope to make the bulb last 2-3yrs, I fly about every other night by the way. I also cheat, I throw on the ap and go back inside to watch tv. LOL Takeoff and landing is the best part anyways.
Rob
----- Original Message -----
From: Steve Wilson
To: simpits-tech@simpits.org
Sent: Thursday, October 03, 2002 3:49 PM
Subject: Re: [simpits-tech] Projectors
But what do the replacement bulbs cost?
Steve
--
Steve Wilson, mafsix@attbi.com on 10/03/2002
On Thu, 03 Oct 2002 13:40:38 -0600, Allen Buffington wrote:
::::
:::: I just purchased a projector last week to use on my Beechcraft
:::: simulator. It is a
:::: 1024x768 native resolution LCD projector. VERY sharp graphic
:::: output and at 3500 lumens it
:::: works even in the brightest light. In fact I almost always
:::: have the brightness turned all
:::: the way down.
:::: I had previously tried a less expensive model projector that I
:::: borrowed from a friend
:::: with a 640x480 native resolution outputting at 800x600 and
:::: while being very impressive
:::: because of the size of screen output it was too fuzzy to be
:::: able to project any gauges on
:::: the screen and be able to read the numbers on them. Perhaps if
:::: you were to use a separate
:::: monitor to show gauges and an inexpensive LCD projector for
:::: outside view it would be
:::: quite exceptable.
::::
:::: Incidentally, I am using rear projection mode with a screen
:::: made from a white shower
:::: curtain stretched between two side poles. I saw this idea here
:::: on the group sometime back
:::: and it actually does work fairly well. I think I still may opt
:::: to purchase a true rear
:::: projection screen in the future but for now it works pretty
:::: good...and cheap too.
::::
:::: ~~Allen
::::
::::
:::: dphens wrote:
::::
:::: > Hi all,
:::: >
:::: > I'm looking into projectors and thought someone here might
:::: have some
:::: > reccomendations/advice. Due to budget constraints, I need to
:::: go as cheap as
:::: > possible, but still have a nice picture. I have actually
:::: found a CRT
:::: > projector for under $1k. Anyone know of any disadvantages
:::: with a CRT versus
:::: > the LCD projectors?
:::: >
:::: > Thanks!
:::: >
:::: > Dave
:::: > _______________________________________________
:::: > Simpits-tech mailing list
:::: > Simpits-tech@simpits.org
:::: > http://www.simpits.org/mailman/listinfo/simpits-tech
:::: > To unsubscribe, please see the instructions at the bottom of
:::: the above page. Thanks!
::::
::::
:::: _______________________________________________
:::: Simpits-tech mailing list
:::: Simpits-tech@simpits.org
:::: http://www.simpits.org/mailman/listinfo/simpits-tech
:::: To unsubscribe, please see the instructions at the bottom of
:::: the above page. Thanks!
_______________________________________________ Simpits-tech mailing list Simpits-tech@simpits.org http://www.simpits.org/mailman/listinfo/simpits-tech To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
--Boundary_(ID_lUJjJ/Av2AJC9UX7erPwXA)
Content-type: text/html; charset=iso-8859-1
Content-transfer-encoding: 7BIT
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1"><BASEFONT
face=Arial color=#000000 size=2>
<META content="MSHTML 6.00.2600.0" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV>bulbs run from 400 to 700 dollars! ouch! I only run my
projector when i'm sitting behind the yoke. By doing it that way, I hope to make
the bulb last 2-3yrs, I fly about every other night by the way. I also cheat, I
throw on the ap and go back inside to watch tv. LOL Takeoff and landing is
the best part anyways.</DIV>
<DIV>Rob</DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=mafsix@attbi.com href="mailto:mafsix@attbi.com">Steve Wilson</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=simpits-tech@simpits.org
href="mailto:simpits-tech@simpits.org">simpits-tech@simpits.org</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Thursday, October 03, 2002 3:49
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: [simpits-tech]
Projectors</DIV>
<DIV><BR></DIV>
<DIV><FONT face=Arial size=2>But what do the replacement bulbs
cost?</FONT><BR></DIV>
<DIV> </DIV><FONT face=Arial size=2></FONT>
<DIV><FONT face=Arial size=2>Steve</FONT> <BR><FONT face=Arial size=2>--
<BR>Steve Wilson, <A href="mailto:mafsix@attbi.com">mafsix@attbi.com</A> on
10/03/2002 <BR></FONT><BR><BR>On Thu, 03 Oct 2002 13:40:38 -0600, Allen
Buffington wrote:<BR>::::<BR><FONT color=#000080>:::: I just purchased
a projector last week to use on my Beechcraft</FONT><BR><FONT
color=#000080>:::: simulator. It is a</FONT><BR><FONT
color=#000080>:::: 1024x768 native resolution LCD projector. VERY sharp
graphic</FONT><BR><FONT color=#000080>:::: output and at 3500 lumens
it</FONT><BR><FONT color=#000080>:::: works even in the brightest
light. In fact I almost always</FONT><BR><FONT color=#000080>:::: have
the brightness turned all</FONT><BR><FONT color=#000080>:::: the way
down.</FONT><BR><FONT color=#000080>:::: I had previously tried a less
expensive model projector that I</FONT><BR><FONT color=#000080>::::
borrowed from a friend</FONT><BR><FONT color=#000080>:::: with a
640x480 native resolution outputting at 800x600 and</FONT><BR><FONT
color=#000080>:::: while being very impressive</FONT><BR><FONT
color=#000080>:::: because of the size of screen output it was too
fuzzy to be</FONT><BR><FONT color=#000080>:::: able to project any
gauges on</FONT><BR><FONT color=#000080>:::: the screen and be able to
read the numbers on them. Perhaps if</FONT><BR><FONT color=#000080>::::
you were to use a separate</FONT><BR><FONT color=#000080>:::: monitor
to show gauges and an inexpensive LCD projector for</FONT><BR><FONT
color=#000080>:::: outside view it would be</FONT><BR><FONT
color=#000080>:::: quite exceptable.</FONT><BR><FONT
color=#000080>::::</FONT><BR><FONT color=#000080>:::: Incidentally, I
am using rear projection mode with a screen</FONT><BR><FONT color=#000080>::::
made from a white shower</FONT><BR><FONT color=#000080>::::
curtain stretched between two side poles. I saw this idea here</FONT><BR><FONT
color=#000080>:::: on the group sometime back</FONT><BR><FONT
color=#000080>:::: and it actually does work fairly well. I think I
still may opt</FONT><BR><FONT color=#000080>:::: to purchase a true
rear</FONT><BR><FONT color=#000080>:::: projection screen in the future
but for now it works pretty</FONT><BR><FONT color=#000080>::::
good...and cheap too.</FONT><BR><FONT color=#000080>::::</FONT><BR><FONT
color=#000080>:::: ~~Allen</FONT><BR><FONT
color=#000080>::::</FONT><BR><FONT color=#000080>::::</FONT><BR><FONT
color=#000080>:::: dphens wrote:</FONT><BR><FONT
color=#000080>::::</FONT><BR><FONT color=#000080>:::: > Hi
all,</FONT><BR><FONT color=#000080>:::: ></FONT><BR><FONT
color=#000080>:::: > I'm looking into projectors and thought
someone here might</FONT><BR><FONT color=#000080>:::: have
some</FONT><BR><FONT color=#000080>::::
> reccomendations/advice. Due to budget constraints, I need
to</FONT><BR><FONT color=#000080>:::: go as cheap as</FONT><BR><FONT
color=#000080>:::: > possible, but still have a nice picture. I
have actually</FONT><BR><FONT color=#000080>:::: found a
CRT</FONT><BR><FONT color=#000080>:::: > projector for under
$1k. Anyone know of any disadvantages</FONT><BR><FONT color=#000080>::::
with a CRT versus</FONT><BR><FONT color=#000080>::::
> the LCD projectors?</FONT><BR><FONT color=#000080>::::
></FONT><BR><FONT color=#000080>::::
> Thanks!</FONT><BR><FONT color=#000080>::::
></FONT><BR><FONT color=#000080>:::: > Dave</FONT><BR><FONT
color=#000080>::::
> _______________________________________________</FONT><BR><FONT
color=#000080>:::: > Simpits-tech mailing list</FONT><BR><FONT
color=#000080>:::: > Simpits-tech@simpits.org</FONT><BR><FONT
color=#000080>:::: > <A
href="http://www.simpits.org/mailman/listinfo/simpits-tech">http://www.simpits.org/mailman/listinfo/simpits-tech</A></FONT><BR><FONT
color=#000080>:::: > To unsubscribe, please see the
instructions at the bottom of</FONT><BR><FONT color=#000080>:::: the
above page. Thanks!</FONT><BR><FONT color=#000080>::::</FONT><BR><FONT
color=#000080>::::</FONT><BR><FONT color=#000080>::::
_______________________________________________</FONT><BR><FONT
color=#000080>:::: Simpits-tech mailing list</FONT><BR><FONT
color=#000080>:::: Simpits-tech@simpits.org</FONT><BR><FONT
color=#000080>:::: <A
href="http://www.simpits.org/mailman/listinfo/simpits-tech">http://www.simpits.org/mailman/listinfo/simpits-tech</A></FONT><BR><FONT
color=#000080>:::: To unsubscribe, please see the instructions at the
bottom of</FONT><BR><FONT color=#000080>:::: the above page.
Thanks!</FONT><BR><BR><BR></DIV>_______________________________________________
Simpits-tech mailing list Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech To unsubscribe, please
see the instructions at the bottom of the above page.
Thanks!</BLOCKQUOTE></BODY></BASEFONT></HTML>
--Boundary_(ID_lUJjJ/Av2AJC9UX7erPwXA)--