AW: AW: [simpits-tech] Just Off The Workbench - Servo DrivenGauges!

[Marc Weigert]

Hi Marv,

glad to hear that!

There are two more gauges that I would like to know if you will do them:
- VSI
- Cabin pressure

They are not really round gauges (with a rectangular face), but the interior
looks nothing more difficult than the gauges you will already be doing.

Cheers & keep up that outstanding work,


Marc








> -----Ursprungliche Nachricht-----
> Von: simpits-tech-admin@simpits.org
> [mailto:simpits-tech-admin@simpits.org]Im Auftrag von Marv De Beque
> Gesendet: Donnerstag, 6. Juni 2002 12:38
> An: simpits-tech@simpits.org
> Betreff: Re: AW: [simpits-tech] Just Off The Workbench - Servo
> DrivenGauges!
>
>
> Yes, doing all the round gauges is the goal.  ;-)
>
> From what Paul has said, I'll be a busy man.  I am ramping things
> up now, so
> I hope to have the first deliveries going out the door very soon.
>
> Marv
> --
>
>
> > From: "Marc Weigert" <mail@marceting.de>
> > Reply-To: simpits-tech@simpits.org
> > Date: Thu, 6 Jun 2002 01:52:40 +0200
> > To: <simpits-tech@simpits.org>
> > Subject: AW: [simpits-tech] Just Off The Workbench - Servo
> Driven Gauges!
> >
> > Hello Marv,
> >
> >> Someone asked about the Fuel QTY gauge and the numeric digits.  It is
> >> looking like I will be able to support that function, too.
> >
> > Really?? You could do that?? :P
> >
> > Does this mean you will basically do all the ROUND gauges
> >
> >
> >> I'm looking forward to seeing some happy faces when these start hitting
> >> peoples' mailboxes.  ;-)
> >
> > I already told Paul that I will order them once available :)
> >
> >
> >
> > Cheers,
> >
> > Marc
> >
> >
> >
> >
> >
> >>
> >> Marv
> >> --
> >>
> >>
> >>> From: "Davide ." <strale_64@hotmail.com>
> >>> Reply-To: simpits-tech@simpits.org
> >>> Date: Tue, 04 Jun 2002 22:09:29 +0000
> >>> To: simpits-tech@simpits.org
> >>> Subject: Re: [simpits-tech] Just Off The Workbench - Servo
> >> Driven Gauges!
> >>>
> >>>
> >>>
> >>> Hey Marv
> >>> So it's arrived the time to sell all those real gauges we were
> >> able to find in
> >>> all these years ???? MY GOD !
> >>>
> >>> GREAT WORK !
> >>>
> >>>
> >>> Davide
> >>>
> >>>
> >>>
> >>>> From: Marv De Beque
> >>>> Reply-To: simpits-tech@simpits.org
> >>>> To:
> >>>> Subject: Re: [simpits-tech] Just Off The Workbench - Servo
> >> Driven Gauges!
> >>>> Date: Mon, 03 Jun 2002 06:43:53 -0400
> >>>>
> >>>> Let me address your questions:
> >>>>
> >>>> 1) Will it be possible to connect the motor part to a real
> >> gouge ? will it
> >>>> fit?
> >>>>
> >>>> No. The drive unit and the gauge head are designed to work
> >> together and are
> >>>> intrinsically different than a real gauge's design. The
> reason for the
> >>>> difference is allow for the gauges to be modular. The drive
> >> module is the
> >>>> same for all other gauges and gauge head sizes. The modularity
> >> allows for
> >>>> the buyer to purchase just the static gauge heads to save
> >> money and upgrade
> >>>> later.
> >>>>
> >>>>
> >>>> 2) So does this include HSI/ADI? (I think the A-4k has F-16
> ADI and HSI
> >>>> after the "Kahu" upgrade)
> >>>>
> >>>> No. Not at this time. The complexity of those instruments is
> >> so high that
> >>>> the cost is prohibitive. I will be looking at ways to make
> >> this happen in
> >>>> the future, but the priority right now is with the round gauges.
> >>>>
> >>>>
> >>>> 3) Will you have some sort of PKD kit so that we can add our
> own gauge
> >>>> faces? (like a generic gauge which I could make into an A-4 ASI...)
> >>>>
> >>>> No. To keep costs at a minimum you will not be able to dismantle the
> >>>> instrument to change the dial face. However, I expect to be
> >> able to offer
> >>>> custom orders in the near future. Right now the focus is on
> >> the F-16 set
> >>>> and getting that into production. Once that has been accomplished, it
> >>>> should be possible to order custom faces.
> >>>>
> >>>> Marv
> >>>>
> >>>> _______________________________________________
> >>>> Simpits-tech mailing list
> >>>> Simpits-tech@simpits.org
> >>>> http://www.simpits.org/mailman/listinfo/simpits-tech
> >>>> To unsubscribe, please see the instructions at the bottom of
> >> the above page.
> >>>> Thanks!
> >>>
> >>>
> >> ------------------------------------------------------------------
> >> ----------
> >>>
> >>> MSN Photos is the easiest way to share and print your photos:
> Click Here
> >>> <http://g.msn.com/1HM500901/157>
> >>> _______________________________________________ Simpits-tech
> >> mailing list
> >>> Simpits-tech@simpits.org
> >> http://www.simpits.org/mailman/listinfo/simpits-tech
> >>> To unsubscribe, please see the instructions at the bottom of
> >> the above page.
> >>> Thanks!
> >>
> >> _______________________________________________
> >> Simpits-tech mailing list
> >> Simpits-tech@simpits.org
> >> http://www.simpits.org/mailman/listinfo/simpits-tech
> >> To unsubscribe, please see the instructions at the bottom of the
> >> above page.  Thanks!
> >>
> >
> > _______________________________________________
> > Simpits-tech mailing list
> > Simpits-tech@simpits.org
> > http://www.simpits.org/mailman/listinfo/simpits-tech
> > To unsubscribe, please see the instructions at the bottom of
> the above page.
> > Thanks!
>
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech@simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the
> above page.  Thanks!