[simpits-tech] PrintServers
Stig Joergensen
simpits-tech@simpits.org
Wed, 13 Feb 2002 22:28:52 +0100
Just a short follow-up
It looks like a std printerserver with multiple ports kan be configured
so 4010 point to par1, 4020 points to par2 ect.... so now i can "print"
lcd commands to 3 lcd displays via a 3 port printerserver....
more testing to follow when time permits
/Stig
> -----Original Message-----
> From: Andreas Fransson [mailto:andreas.fransson@post.utfors.se]
> Sent: 13. februar 2002 19:19
> To: simpits-tech@simpits.org
> Subject: Re: [simpits-tech] PrintServers
>
>
> Hey, I had never thought of this! I am going to try and use
> one or two graphical LCD displays with my 'pit, as nav/comm
> displays, and driving them through the parallell port. But a
> printer server really expands the possibilities of this concept.
>
> Thanks Stig!
>
> /Andreas
>
>
> From: "Stig Joergensen" <stig.joergensen@clearsky.dk>
> > Hey my fellow pitters....
> >
> >
> > Just made a fancy discovery..... Well some of you probably know this
> > already....
> >
> > To drive small Character LCD displays you can easily use a Generic
> > network printer server with a parallel interface.... it
> appears that a
> > tcp port is established for the par port on the server, and you can
> > easily write to this port with telnet and the bytes you type in the
> > telnet window will is stamped directly on the par port.
> (jesses what a
> > line)
> >
> > the port number are 4010 (4020, 4030 are also available as logical
> > ports, and have nothing to do with the number of ports on
> the server)
> >
> >
> > Just thought it might be useful information....
> >
> >
> > /Stig
>
>
>
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech@simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
>