AW: [simpits-tech] So you wanna build a HUD, eh?
Marc Weigert
simpits-tech@simpits.org
Tue, 5 Feb 2002 20:16:28 +0100
Gene, did you mean this one??
http://www.digisys.net/timeline/blowout.html#monitor
The green one for $19 is the right one?
Monitors
Non-Enclosed TTL
Comes with pinout
12V at 1.4 Amp input
Horizontal frequency 15 KHz
Ability to do 40 and 80 columns
Size Color Price
5" Green $19.00
5" Amber $15.00
7" Amber $19.00
9" Green or Amber $19.00
5" Color Monitor $19.00 or 2 for $29.00
Flat faceplate
320 x 200 dot resolution
CGA & Hercules Compatible
12VDC Operation
15.75 KHz Horizontal Frequency
60 Hz Vertical Sync. Frequency
Open Frame Construction
Standard Interface Connector
Degaussing Coil Included
Mfr. Samtron
> -----Ursprungliche Nachricht-----
> Von: simpits-tech-admin@simpits.org
> [mailto:simpits-tech-admin@simpits.org]Im Auftrag von Gene Buckle
> Gesendet: Dienstag, 5. Februar 2002 20:39
> An: simpits-tech@simpits.org
> Betreff: [simpits-tech] So you wanna build a HUD, eh?
>
>
> Check this out: http://home.att.net/~jim-bean/doc1.htm
>
> I did some digging and found this gents page. If you go to
> http://home.att.net/~jim-bean/doc6.htm you can see the parts he used to
> build the HUD. They were purchased from Edmund Scientific. This is
> exactly the kind of thing you guys need to build a HUD for your cockpit.
>
> BTW, if you build it exactly like he did (using a CGA or Herc mono CRT),
> then you can head over to the Timeline, Inc. website (sorry, I don't have
> a link) and pick up a 5" CGA/Mono CRT for under $30.
>
> I'm going to contact the author of the page and see if he won't do a
> better write up for the simpits website. :)
>
> g.
>
>
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech@simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
>
>