LVDT & Synchro's Was Re: [simpits-tech] MarvMan and Craigo Fixed Stick Update

[Marv De Beque]

;-)  That be the chip.  ;-)


On 12/22/02 12:10 PM, "David C. Allen" <allendc@qwest.net> wrote:

> At 11:23 AM 12/22/2002 -0500, you wrote:
>> Thanks, just sent him a bunch of information yesterday, but my needs are
>> application specific, so anything he makes will most likely not work with
>> the Cougar base.
> 
> Nothing is cast in concrete.
> 
>> However, I did send him some good information on a single chip solution for
>> LVDT that should help him get started.
> 
> We talked about using the Philips part NE/SE5521
> 
> As a side note Chester could use some synchro's for testing his synchro
> driver board so if anyone has some parts contact fitchett@phidgets.com
> 
> David
> 
>> Marv
>> 
>> On 12/21/02 9:39 PM, "David C. Allen" <allendc@qwest.net> wrote:
>> 
>>> After reading Craig Rochester post about using LVDT's I started playing
>>> with the ones that are used in the 737 Pitch and Roll axis.
>>> 
>>> http://www.737flightsim.com/force_sensor.html
>>> 
>>> I also have had conversations with Chester, @ Phidgets.com about building a
>>> LVDT Phidget.  So Marv you may want to contact Chester,
>>> fitchett@phidgets.com and talk to him about the F16 application.
>>> 
>>> David
>>> www.737FlightSim.com
>>> 
>>> 
>>> At 05:57 PM 12/20/2002 -0500, you wrote:
>>>> Hey Steve,
>>>> 
>>>> I feel a bit awkward, albeit flattered, to be associated with Marv's work.
>>>> :)  My tinkering and jury rigging isn't in the same class as Marv's work.
>>>> 
>>>> I have been busy with work and the holidays so haven't had much time to
>>>> spend on the stick-base project.  While working with the LVDT test rig:
>>>> 
>> http://pages.zdnet.com/johncraigrochester/sitebuildercontent/sitebuilderpict
>>>> ures/lvdtstick4.jpg
>>> 
>>> _______________________________________________
>>> Simpits-tech mailing list
>>> Simpits-tech@simpits.org
>>> http://www.simpits.org/mailman/listinfo/simpits-tech
>>> To unsubscribe, please see the instructions at the bottom of the above
>> page.
>>> Thanks!
>> 
>> _______________________________________________
>> Simpits-tech mailing list
>> Simpits-tech@simpits.org
>> http://www.simpits.org/mailman/listinfo/simpits-tech
>> To unsubscribe, please see the instructions at the bottom of the above
>> page.  Thanks!
> 
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech@simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above page.
> Thanks!