[simpits-tech] Epiclink Problems.. WAS: Correct list for Epic?

[Marc Teichtahl]

Stuart,

1. please migrate all your EPL to the new EPL syntax. I will send you
epicenter v0.1.144 in a separate email. This will force you to create
the correct device descriptors and epl syntax. I can help you with this
migration.you will find the new syntax to be completely different and
*much* more powerful with its C like syntax

2. test your epl on a local system

3. there must be a config error in the epiclink config. I wont have time
until tomorrow to look this over...

4. are you running wideclient on the client machine ?

-----Original Message-----
From: Stuart Whelan [mailto:buffy@paradise.net.nz] 
Sent: 13 April 2002 02:12
To: simpits-tech@simpits.org
Subject: [simpits-tech] Epiclink Problems.. WAS: Correct list for Epic?


Hi Marc,

Well, I have upgraded to 2.85 of FSUPIC, and done the packet capture, it
showed two way communication taking place between the Epic machine and
the FS2k2 machine. Still no change to the problem though.

I have added all the files that may be of use, including the file from
ethereal, into a zip file, which can be obtained from
http://aelfhame.net/~stuartw/epic_logs1.zip. 

Included in this zip is the EPL code I am using, very small and simple.

Be aware that in this zip file the packet capture and the epicinfo logs
are not for the same time period. :)

I have a few questions I hope you might be able to answer for me:

1. With EpicLink running and connected, when I look in game controllers
on my FS2k2 machine should all the joysticks show OK or Unconnected?
They show OK on the Epic machine, but unconnected the FS2k2 machine.

2. Do I need to do anything on the FS2k2 machine apart from start
EpicClient? I do not need to load an epl file into epic client do I?
Just into the epic card running epicserver?

3. Do I need to do anything special in my EPL code to use epiclink?

Cheers!
Stuart.
> -----Original Message-----
> From: simpits-tech-admin@simpits.org 
> [mailto:simpits-tech-admin@simpits.org] On Behalf Of Marc Teichtahl
> Sent: Friday, April 12, 2002 10:57 PM
> To: simpits-tech@simpits.org
> Subject: RE: [simpits-tech] Correct list for Epic?
> 
> 
> I would upgrade to the latest FSUIPC and wide client from 
> http://www.schiratti.com/dowson.html
> 
> We are up to 
> FSUIPC 2.85
> Epicinfo 3.91
> Widefs 5.01
> 
> If you want to watch your ethernet port activities down load 
> ethereal from http://www.ethereal.com/ and install it on both 
> PC's. This will do protocol specific capaturing for you, 
> including IPX :)
> 
> If you cant interperate the ethereal information then send me 
> the capture file and ill look it over for you :-)



_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above
page.  Thanks!