[simpits-tech] Falcon 4.0 with motion sim

[Volker Metzger]

ok ken,
no problem,
lets do the next test,

1. switch the rock mainboard to analog
2. push a joystick direct into the mainboard joystick extension
3. turn power on
4. start compressor
5. the rock must now move with the joystick movemnet,
if not we check the components
volker

"Ken Trager" <kenamt@clt.bellsouth.net> schrieb:
> Volker,
> 
> Okay - I got my COMM2 port up and running and I tested it with my Palm and I can
> Hotsync to Comm 2.
> 
> I used your checklist (THANKS for that) and Iam still getting the error message
> 
> "Can't open a serial port for MSim!" It is in a Initialization Error Box.
> 
> What should I test next - I know the comm port can be opened!
> 
> Thanks
> 
> Ken Trager
> 
> > 1. go to the link motionsystems.de/rnr/,
> > 2. go to profile
> > 3. download "msim.dll"
> > 4. download "alle profile gepackt" means all profiles
> > 5. unzip the files
> > 6. copy msim.dll to windows/system,
> > reboot system
> > 7. set control selector on the motherboard from the rock n ride to "digital",
> > 8. connect the seriell cable with the rock n ride"serial in"  and com2 off the computer
> > start the compressor and the power on
> > 9. start profil "joystick.exe"
> > 10. now the rock n ride must move with the joystick movements
> 
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech@simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above page.  Thanks!
>