<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=US-ASCII">
<META content="MSHTML 6.00.2800.1106" name=GENERATOR></HEAD>
<BODY id=role_body style="FONT-SIZE: 10pt; COLOR: #000000; FONT-FAMILY: Arial"
bottomMargin=7 leftMargin=7 topMargin=7 rightMargin=7><FONT id=role_document
face=Arial color=#000000 size=2>
<DIV>well if you want to get real values from your existing stick, open it up,
probably 4 screws on the bottom. watch for springs, you should see the
potentiometers (pot) you'll have to solder a wire to the pot correctly and drill
an extra hole in the case to run your wire through. this could change the
reading you get from the basic stick though. I've never tried to run to output
off the same pot, and I've been out of electronics for a few years to do the
math but it could work. but that's what it would
take.</DIV></FONT></BODY></HTML>