Simpits International Forum: simpits-tech => [simpits-tech] Custom Crimper

Members

Help

Home

Home » Simpit Discussion » simpits-tech » [simpits-tech] Custom Crimper

Show: Today's Messages :: Show Polls :: Message Navigator

[simpits-tech] Custom Crimper [message #607]

Wed, 29 July 2009 18:56

allendc
Messages: 44
Registered: February 2009

Member

I needed to crimp some wire rope to some control line terminals for
the sim, checking the web the Crimpers are big bucks! Only a person
like Gene could afford to have a pair hanging around his man land
only to be used one or two times of the F15.

So I visited Harbor Freight, and found a pair of 18 inch bolt cutters
for under $20usd. Then off to the water jet boys to make some new
jaws, for around $20usd

Tomorrow I will pick up the end mill to cut the die pattern, around $10usd

While I acknowledge the jaws are not made from tool steel, I am sure
I can get the 10 or 12 crimps I need!

Here is a link showing the conversion.

http://www.737flightsim.com/cut/cut.html

David
www.737FlightSim.com

_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!

Report message to a moderator

Re: [simpits-tech] Custom Crimper [message #609 is a reply to message #607 ]

Thu, 30 July 2009 07:45

Roy Coates
Messages: 438
Registered: January 2009

Senior Member

On Wed, 29 Jul 2009, David C. Allen wrote:

Very nice David. It's the 'workarounds' like this that make pit building
so much fun I think :-)

--

Roy Coates.
Dept of Engineering.
Liverpool University.
E-Mail: r.coates@liv.ac.uk
Tel: 0151 794 4862
------------------------------------------------------------ -------------------
Lord, If I must have an instrument failure, please let it be the Hobbs meter.
------------------------------------------------------------ -------------------

_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!

Report message to a moderator

Re: [simpits-tech] Custom Crimper [message #611 is a reply to message #607 ]

Thu, 30 July 2009 08:29

Gene Buckle
Messages: 1068
Registered: January 2009

Senior Member
Administrator

On Wed, 29 Jul 2009, David C. Allen wrote:

> I needed to crimp some wire rope to some control line terminals for
> the sim, checking the web the Crimpers are big bucks! Only a person
> like Gene could afford to have a pair hanging around his man land
> only to be used one or two times of the F15.
>
Pfft. I can't even evict the moths in my wallet - I need their rent
money. :)

> http://www.737flightsim.com/cut/cut.html
>

Poor man's swagging tool! I love it! :)

I'd love to have something like that to neck-down 1/2" conduit for use as
pushrods.

g.

--
Proud owner of F-15C 80-0007
http://www.f15sim.com - The only one of its kind.

ScarletDME - The red hot Data Management Environment
A Multi-Value database for the masses, not the classes.
http://www.scarletdme.org - Get it _today_!
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!

Report message to a moderator

Re: [simpits-tech] Custom Crimper [message #614 is a reply to message #611 ]

Thu, 30 July 2009 10:04

allendc
Messages: 44
Registered: February 2009

Member

At 08:29 AM 7/30/2009 -0700, you wrote:
>On Wed, 29 Jul 2009, David C. Allen wrote:
>
> > I needed to crimp some wire rope to some control line terminals for
> > the sim, checking the web the Crimpers are big bucks! Only a person
> > like Gene could afford to have a pair hanging around his man land
> > only to be used one or two times of the F15.
> >
>Pfft. I can't even evict the moths in my wallet - I need their rent
>money. :)
>
> > http://www.737flightsim.com/cut/cut.html
> >
>
>Poor man's swagging tool! I love it! :)

If anyone wants the DXF for the jaws, I can send the file.

>I'd love to have something like that to neck-down 1/2" conduit for use as
>pushrods.

You would have to go the 42" bolt cutters for $29.99 LOL

I am going to make a second set of jaws to crimp battery terminals.

David
www.737FlightSim.com

_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!

Report message to a moderator

Previous Topic:	[simpits-tech] No LeoBodnar? Try Hagstrom.
Next Topic:	Re: [simpits-tech] Custom Crimper

Goto Forum:

-=] Back to Top [=-

[ Generate printable PDF ] [ Syndicate this forum (XML) ] [

]

Current Time: Tue May 21 19:26:57 PDT 2013

Total time taken to generate the page: 0.04135 seconds

.:: Contact :: Home ::.