Home » Simpit Discussion » simpits-tech » Re: [simpits-tech] How do I create a selective start....
Re: [simpits-tech] How do I create a selective start.... [message #684] Tue, 11 August 2009 12:45 Go to next message
Sean Galbraith  is currently offline Sean Galbraith
Messages: 251
Registered: February 2009
Senior Member

>
>I want this one!!
>
> http://www.usb-flashdrive.co.uk/product.html?pid=194&cid =23

Where can you get them from?!?! Without buying 100 that is...

Hmm.. wonder if our marketing guys could come up with a "need" to get
some........

SeanG

_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
Re: [simpits-tech] How do I create a selective start.... [message #685 is a reply to message #684 ] Tue, 11 August 2009 19:06 Go to previous messageGo to next message
Roy Coates  is currently offline Roy Coates
Messages: 438
Registered: January 2009
Senior Member
On Wed, 12 Aug 2009, Sean Galbraith wrote:


No doubt a trawl on Evilbay would yield results...

>
> >
> >I want this one!!
> >
> > http://www.usb-flashdrive.co.uk/product.html?pid=194&cid =23
>
> Where can you get them from?!?! Without buying 100 that is...
>
> Hmm.. wonder if our marketing guys could come up with a "need" to get
> some........
>
> SeanG
>
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech@simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
>



--

Roy Coates.
Dept of Engineering.
Liverpool University.
E-Mail: r.coates@liv.ac.uk
Tel: 0151 794 4862
------------------------------------------------------------ -------------------
Lord, If I must have an instrument failure, please let it be the Hobbs meter.
------------------------------------------------------------ -------------------

_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
Re: [simpits-tech] How do I create a selective start.... [message #686 is a reply to message #685 ] Tue, 11 August 2009 19:20 Go to previous messageGo to next message
Rick Davis  is currently offline Rick Davis
Messages: 128
Registered: January 2009
Senior Member
Guys,

This isn't anything new. I've been carting an 8 gig thumb drive around on my
keytag for a couple years now. Handy.

Incidentally, that is more than enough room to burn an image of the X-Plane
Master Disk. Or anything really. You can buy it shaped anyway you like, but
it's just the same thing. Whether it's shaped like a Key or a lipstick
container.

Here's an example:

http://www.tigerdirect.com/applications/Category/category_tl c.asp?CatId=379&name=USB-Flash-Drives

These things are a dime a dozen now. Getting bigger. Soon, we won't even
need a hard drive. Just plug the thing into your watch. Record some video.

ha ha

R

----- Original Message -----
From: "Roy Coates" <roy@flightlab.liv.ac.uk>
To: "Simulator Cockpit Builder's List" <simpits-tech@simpits.org>
Sent: Tuesday, August 11, 2009 11:06 PM
Subject: Re: [simpits-tech] How do I create a selective start....


> On Wed, 12 Aug 2009, Sean Galbraith wrote:
>
>
> No doubt a trawl on Evilbay would yield results...
>
>>
>> >
>> >I want this one!!
>> >
>> > http://www.usb-flashdrive.co.uk/product.html?pid=194&cid =23
>>
>> Where can you get them from?!?! Without buying 100 that is...
>>
>> Hmm.. wonder if our marketing guys could come up with a "need" to get
>> some........
>>
>> SeanG
>>
>> _______________________________________________
>> Simpits-tech mailing list
>> Simpits-tech@simpits.org
>> http://www.simpits.org/mailman/listinfo/simpits-tech
>> To unsubscribe, please see the instructions at the bottom of the above
>> page. Thanks!
>>
>
>
>
> --
>
> Roy Coates.
> Dept of Engineering.
> Liverpool University.
> E-Mail: r.coates@liv.ac.uk
> Tel: 0151 794 4862
> ------------------------------------------------------------ -------------------
> Lord, If I must have an instrument failure, please let it be the Hobbs
> meter.
> ------------------------------------------------------------ -------------------
>
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech@simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above
> page. Thanks!

_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
Re: [simpits-tech] How do I create a selective start.... [message #687 is a reply to message #685 ] Tue, 11 August 2009 19:24 Go to previous messageGo to next message
Rick Davis  is currently offline Rick Davis
Messages: 128
Registered: January 2009
Senior Member
Like 64 friggin Gigs for under 200 bucks?

Geese.

http://www.tigerdirect.com/applications/SearchTools/item-det ails.asp?EdpNo=4307858&CatId=3787


----- Original Message -----
From: "Roy Coates" <roy@flightlab.liv.ac.uk>
To: "Simulator Cockpit Builder's List" <simpits-tech@simpits.org>
Sent: Tuesday, August 11, 2009 11:06 PM
Subject: Re: [simpits-tech] How do I create a selective start....


> On Wed, 12 Aug 2009, Sean Galbraith wrote:
>
>
> No doubt a trawl on Evilbay would yield results...
>
>>
>> >
>> >I want this one!!
>> >
>> > http://www.usb-flashdrive.co.uk/product.html?pid=194&cid =23
>>
>> Where can you get them from?!?! Without buying 100 that is...
>>
>> Hmm.. wonder if our marketing guys could come up with a "need" to get
>> some........
>>
>> SeanG
>>
>> _______________________________________________
>> Simpits-tech mailing list
>> Simpits-tech@simpits.org
>> http://www.simpits.org/mailman/listinfo/simpits-tech
>> To unsubscribe, please see the instructions at the bottom of the above
>> page. Thanks!
>>
>
>
>
> --
>
> Roy Coates.
> Dept of Engineering.
> Liverpool University.
> E-Mail: r.coates@liv.ac.uk
> Tel: 0151 794 4862
> ------------------------------------------------------------ -------------------
> Lord, If I must have an instrument failure, please let it be the Hobbs
> meter.
> ------------------------------------------------------------ -------------------
>
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech@simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above
> page. Thanks!

_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
Re: [simpits-tech] How do I create a selective start.... [message #688 is a reply to message #687 ] Wed, 12 August 2009 06:19 Go to previous messageGo to next message
Gene Buckle  is currently offline Gene Buckle
Messages: 1067
Registered: January 2009
Senior Member
Administrator
On Tue, 11 Aug 2009, Rick Davis wrote:

> Like 64 friggin Gigs for under 200 bucks?
>
> Geese.
>
> http://www.tigerdirect.com/applications/SearchTools/item-det ails.asp?EdpNo=4307858&CatId=3787

You'd be better off jumping into a swimming pool filled with double-edged
razor blades than buying something from Tiger Direct.

g.

--
Proud owner of F-15C 80-0007
http://www.f15sim.com - The only one of its kind.

ScarletDME - The red hot Data Management Environment
A Multi-Value database for the masses, not the classes.
http://www.scarletdme.org - Get it _today_!
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
Re: [simpits-tech] How do I create a selective start.... [message #689 is a reply to message #688 ] Wed, 12 August 2009 06:22 Go to previous messageGo to next message
Roy Coates  is currently offline Roy Coates
Messages: 438
Registered: January 2009
Senior Member
On Wed, 12 Aug 2009, Gene Buckle wrote:

> > Like 64 friggin Gigs for under 200 bucks?
> >
> > Geese.
> >
> > http://www.tigerdirect.com/applications/SearchTools/item-det ails.asp?EdpNo=4307858&CatId=3787
>
> You'd be better off jumping into a swimming pool filled with double-edged
> razor blades than buying something from Tiger Direct.


I'm guessing you'd not recommend Tiger then, gene.

Call my psychic, it's just a hunch.

--

Roy Coates.
Dept of Engineering.
Liverpool University.
E-Mail: r.coates@liv.ac.uk
Tel: 0151 794 4862
------------------------------------------------------------ -------------------
Lord, If I must have an instrument failure, please let it be the Hobbs meter.
------------------------------------------------------------ -------------------

_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
Re: [simpits-tech] How do I create a selective start.... [message #690 is a reply to message #687 ] Wed, 12 August 2009 06:18 Go to previous messageGo to next message
Roy Coates  is currently offline Roy Coates
Messages: 438
Registered: January 2009
Senior Member
On Tue, 11 Aug 2009, Rick Davis wrote:

> Like 64 friggin Gigs for under 200 bucks?
>


Heh... drool... I know... rocks, doesn't it?


--

Roy Coates.
Dept of Engineering.
Liverpool University.
E-Mail: r.coates@liv.ac.uk
Tel: 0151 794 4862
------------------------------------------------------------ -------------------
Lord, If I must have an instrument failure, please let it be the Hobbs meter.
------------------------------------------------------------ -------------------

_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
Re: [simpits-tech] How do I create a selective start.... [message #691 is a reply to message #689 ] Wed, 12 August 2009 06:29 Go to previous messageGo to next message
Gene Buckle  is currently offline Gene Buckle
Messages: 1067
Registered: January 2009
Senior Member
Administrator
On Wed, 12 Aug 2009, Roy Coates wrote:

> On Wed, 12 Aug 2009, Gene Buckle wrote:
>
>>> Like 64 friggin Gigs for under 200 bucks?
>>>
>>> Geese.
>>>
>>> http://www.tigerdirect.com/applications/SearchTools/item-det ails.asp?EdpNo=4307858&CatId=3787
>>
>> You'd be better off jumping into a swimming pool filled with double-edged
>> razor blades than buying something from Tiger Direct.
>
>
> I'm guessing you'd not recommend Tiger then, gene.
>
> Call my psychic, it's just a hunch.

The horror stories I've read about TD customer service are legendary.
"Sleazebags" is being charitable.

If you're hunting for a deal, check out http://www.pricewatch.com -
they've been around quite a while and I've never had any issues with the
vendors that show up on searches from them.

g.


--
Proud owner of F-15C 80-0007
http://www.f15sim.com - The only one of its kind.

ScarletDME - The red hot Data Management Environment
A Multi-Value database for the masses, not the classes.
http://www.scarletdme.org - Get it _today_!
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
Re: [simpits-tech] How do I create a selective start.... [message #692 is a reply to message #691 ] Wed, 12 August 2009 08:01 Go to previous messageGo to next message
Rick Davis  is currently offline Rick Davis
Messages: 128
Registered: January 2009
Senior Member

> On Wed, 12 Aug 2009, Roy Coates wrote:
>
>> On Wed, 12 Aug 2009, Gene Buckle wrote:
>>
>>>> Like 64 friggin Gigs for under 200 bucks?
>>>>
>>>> Geese.
>>>>
>>>> http://www.tigerdirect.com/applications/SearchTools/item-det ails.asp?EdpNo=4307858&CatId=3787
>>>
>>> You'd be better off jumping into a swimming pool filled with
>>> double-edged
>>> razor blades than buying something from Tiger Direct.
>>
>>
>> I'm guessing you'd not recommend Tiger then, gene.
>>
>> Call my psychic, it's just a hunch.
>
> The horror stories I've read about TD customer service are legendary.
> "Sleazebags" is being charitable.
>
> If you're hunting for a deal, check out http://www.pricewatch.com -
> they've been around quite a while and I've never had any issues with the
> vendors that show up on searches from them.
>
> g.

I've heard that before, but fortunately for me I have never had any problems
with them at all, and a direct phone number to the same guy every time I
need anything, as well as an additional 10% discount on any price they
advertise and free shipping on orders over 500.00. (I have a corporate
account)

I will say this though, any troubles I've had with them were solely the
fault of UPS, which is about the most inept shipping company in the World,
and the only one they use. Wouldn't matter if the box clearly said "Eggs -
handle with care", they still throw it off the back of the truck. (or it
somehow goes missing) They have lost or destroyed literally 25% of
everything I've ever ordered in the past five years.

Rick
>
>
> --
> Proud owner of F-15C 80-0007
> http://www.f15sim.com - The only one of its kind.
>
> ScarletDME - The red hot Data Management Environment
> A Multi-Value database for the masses, not the classes.
> http://www.scarletdme.org - Get it _today_!
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech@simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above
> page. Thanks!

_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
Re: [simpits-tech] How do I create a selective start.... [message #693 is a reply to message #692 ] Wed, 12 August 2009 08:22 Go to previous messageGo to next message
Gene Buckle  is currently offline Gene Buckle
Messages: 1067
Registered: January 2009
Senior Member
Administrator
>
> I will say this though, any troubles I've had with them were solely the
> fault of UPS, which is about the most inept shipping company in the World,
> and the only one they use. Wouldn't matter if the box clearly said "Eggs -
> handle with care", they still throw it off the back of the truck. (or it
> somehow goes missing) They have lost or destroyed literally 25% of
> everything I've ever ordered in the past five years.
>

Yeah, UPS is the only shipper I know of that could deliver a 6" cube of
depleted uranium, dented. :)

Remind me to send a link to the Box of Fail sometime. :)

g.

--
Proud owner of F-15C 80-0007
http://www.f15sim.com - The only one of its kind.

ScarletDME - The red hot Data Management Environment
A Multi-Value database for the masses, not the classes.
http://www.scarletdme.org - Get it _today_!
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
Re: [simpits-tech] How do I create a selective start.... [message #694 is a reply to message #693 ] Thu, 13 August 2009 04:53 Go to previous messageGo to next message
Brian Sikkema  is currently offline Brian Sikkema
Messages: 57
Registered: January 2009
Member

>
> Yeah, UPS is the only shipper I know of that could deliver a 6" cube of
> depleted uranium, dented. :)
>
>

COULD, or DID? On second thought, don't answer, Big Brother's listening....

Brian
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
Re: [simpits-tech] How do I create a selective start.... [message #695 is a reply to message #694 ] Thu, 13 August 2009 05:22 Go to previous messageGo to next message
Roy Coates  is currently offline Roy Coates
Messages: 438
Registered: January 2009
Senior Member
On Thu, 13 Aug 2009, Brian Sikkema wrote:

> > Yeah, UPS is the only shipper I know of that could deliver a 6" cube of
> > depleted uranium, dented. :)
> >
> >
>
> COULD, or DID? On second thought, don't answer, Big Brother's listening....


Heh... indeed... after all this is gene we're talking about... heh..
hehehehehe....


--

Roy Coates.
Dept of Engineering.
Liverpool University.
E-Mail: r.coates@liv.ac.uk
Tel: 0151 794 4862
------------------------------------------------------------ -------------------
Lord, If I must have an instrument failure, please let it be the Hobbs meter.
------------------------------------------------------------ -------------------

_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
Re: [simpits-tech] How do I create a selective start.... [message #696 is a reply to message #694 ] Thu, 13 August 2009 06:31 Go to previous messageGo to next message
Gene Buckle  is currently offline Gene Buckle
Messages: 1067
Registered: January 2009
Senior Member
Administrator
On Thu, 13 Aug 2009, Brian Sikkema wrote:

>
>>
>> Yeah, UPS is the only shipper I know of that could deliver a 6" cube of
>> depleted uranium, dented. :)
>>
>>
>
> COULD, or DID? On second thought, don't answer, Big Brother's listening....
>

Could. Besides the rail gun doesn't take....oh wait. Nevermind.


:)

g.

--
Proud owner of F-15C 80-0007
http://www.f15sim.com - The only one of its kind.

ScarletDME - The red hot Data Management Environment
A Multi-Value database for the masses, not the classes.
http://www.scarletdme.org - Get it _today_!
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
Re: [simpits-tech] How do I create a selective start.... [message #697 is a reply to message #695 ] Thu, 13 August 2009 06:32 Go to previous messageGo to next message
Gene Buckle  is currently offline Gene Buckle
Messages: 1067
Registered: January 2009
Senior Member
Administrator
On Thu, 13 Aug 2009, Roy Coates wrote:

> On Thu, 13 Aug 2009, Brian Sikkema wrote:
>
>>> Yeah, UPS is the only shipper I know of that could deliver a 6" cube of
>>> depleted uranium, dented. :)
>>>
>>>
>>
>> COULD, or DID? On second thought, don't answer, Big Brother's listening....
>
>
> Heh... indeed... after all this is gene we're talking about... heh..
> hehehehehe....
>
*looks up, whistles innocently*

g.


--
Proud owner of F-15C 80-0007
http://www.f15sim.com - The only one of its kind.

ScarletDME - The red hot Data Management Environment
A Multi-Value database for the masses, not the classes.
http://www.scarletdme.org - Get it _today_!
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
Re: [simpits-tech] How do I create a selective start.... [message #698 is a reply to message #696 ] Fri, 14 August 2009 08:25 Go to previous message
phoenixcomm  is currently offline phoenixcomm
Messages: 164
Registered: January 2009
Location: Fort Worth, Tx
Senior Member

DID!! (Brown is there color for a reason.... don't think hard.. think
toilet. :[

Cris H.


-----Original Message-----
From: simpits-tech-bounces@simpits.org
[mailto:simpits-tech-bounces@simpits.org] On Behalf Of Gene Buckle
Sent: Thursday, August 13, 2009 8:31 AM
To: brian@sikkema.us; Simulator Cockpit Builder's List
Subject: Re: [simpits-tech] How do I create a selective start....

On Thu, 13 Aug 2009, Brian Sikkema wrote:

>
>>
>> Yeah, UPS is the only shipper I know of that could deliver a 6" cube of
>> depleted uranium, dented. :)
>>
>>
>
> COULD, or DID? On second thought, don't answer, Big Brother's
listening....
>

Could. Besides the rail gun doesn't take....oh wait. Nevermind.


:)

g.

--
Proud owner of F-15C 80-0007
http://www.f15sim.com - The only one of its kind.

ScarletDME - The red hot Data Management Environment
A Multi-Value database for the masses, not the classes.
http://www.scarletdme.org - Get it _today_!
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page.
Thanks!
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.53/2299 - Release Date: 08/12/09
18:12:00

_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
Previous Topic:[simpits-tech] How do I create a selective start....
Next Topic:[simpits-tech] Using D-Type Connectors
Goto Forum:
  


Current Time: Sun May 19 12:59:12 PDT 2013

Total time taken to generate the page: 0.04788 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 2.7.7.
Copyright ©2001-2007 FUD Forum Bulletin Board Software