Home » Simpit Discussion » simpits-tech » [simpits-tech] OpenCockpits IOCards...
| | |
| Re: [simpits-tech] OpenCockpits IOCards... [message #58 is a reply to message #57 ] |
Tue, 03 February 2009 07:44   |
 Gene Buckle
Messages: 1083
Registered: January 2009 |
Senior Member
Administrator |
|
|
On Tue, 3 Feb 2009, Roy Coates wrote:
> On Tue, 3 Feb 2009, Gene Buckle wrote:
>
>> Is there anyone on the list that uses this hardware? I've been trying to
>> find some documentation on programming this stuff and I'm getting nowhere...
>>
>
> Isn't it there in the downloads section under (software) ?
>
Nope. There's a DLL available for download, but the docs are useless even
before I feed them into translate.google.com
The hardware looks really promising, especially at the price point it's
at, but if they won't provide documentation on it, it might as well not
exist.
It's at the point where I just don't have the time to dick around with
them - if they can't provide the docs, then I'll be damned if I'm going to
waste a dime of my money or another minute of my time. I don't have any
extra of eitehr to spare.
g.
--
Proud owner of F-15C 80-0007
http://www.f15sim.com - The only one of its kind.
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
|
|
|
| Re: [simpits-tech] OpenCockpits IOCards... [message #59 is a reply to message #58 ] |
Tue, 03 February 2009 07:49 |
Roy Coates
Messages: 440
Registered: January 2009 |
Senior Member |
|
|
On Tue, 3 Feb 2009, Gene Buckle wrote:
> > Isn't it there in the downloads section under (software) ?
> >
>
> Nope. There's a DLL available for download, but the docs are useless even
> before I feed them into translate.google.com
>
> The hardware looks really promising, especially at the price point it's
> at, but if they won't provide documentation on it, it might as well not
> exist.
>
> It's at the point where I just don't have the time to dick around with
> them - if they can't provide the docs, then I'll be damned if I'm going to
> waste a dime of my money or another minute of my time. I don't have any
> extra of eitehr to spare.
This is sounding like another "it works fine with MSFS" type company.
I got bitten by one of those too. :-(
--
Roy Coates.
Dept of Engineering.
Liverpool University.
E-Mail: r.coates@liv.ac.uk
Tel: 0151 794 4862
------------------------------------------------------------ -------------------
Lord, If I must have an instrument failure, please let it be the Hobbs meter.
------------------------------------------------------------ -------------------
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
|
|
|
| Re: [simpits-tech] OpenCockpits IOCards... [message #60 is a reply to message #59 ] |
Tue, 03 February 2009 08:02 |
Gene Buckle
Messages: 1083
Registered: January 2009 |
Senior Member
Administrator |
|
|
On Tue, 3 Feb 2009, Roy Coates wrote:
> On Tue, 3 Feb 2009, Gene Buckle wrote:
>
>>> Isn't it there in the downloads section under (software) ?
>>>
>>
>> Nope. There's a DLL available for download, but the docs are useless even
>> before I feed them into translate.google.com
>>
>> The hardware looks really promising, especially at the price point it's
>> at, but if they won't provide documentation on it, it might as well not
>> exist.
>>
>> It's at the point where I just don't have the time to dick around with
>> them - if they can't provide the docs, then I'll be damned if I'm going to
>> waste a dime of my money or another minute of my time. I don't have any
>> extra of eitehr to spare.
>
>
> This is sounding like another "it works fine with MSFS" type company.
>
> I got bitten by one of those too. :-(
>
What blows me away is that they basically give it all away. You can
download the gerber files for the boards and everything. I just checked
the site and they don't provide source code for the PICs either, just hex
files. If I could get my hands on the PIC source I could probably puzzle
out the protocol myself if I had to.
>From what I can tell, there is no way to get out from under this SIOC
application they use. For my purposes, that's a big bucket of fail.
They need to take a hard look at PHCC to see how to do this kind of thing
_right_.
g.
--
Proud owner of F-15C 80-0007
http://www.f15sim.com - The only one of its kind.
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
|
|
| |
| Re: [simpits-tech] OpenCockpits IOCards... [message #62 is a reply to message #55 ] |
Tue, 03 February 2009 12:45 |
Joseph Fagner
Messages: 52
Registered: January 2009 |
Member |
|
|
This is typical of the MSFS community. You can never get any of these guys
to allow you to interface with their stuff. This is the same thing Leo ran
into when he tried to break into the MSFS community.
Gene, I assume your interface is compatable with the PHCC? When will you
have a beta for testing with...specifically for falcon 4.0?
No one has yet release a functional piece of software for PHCC.
Jay
Show me a man who cannot be bothered to do the little things, and I will
show you a man who cannot be trusted to do the big ones.
--Lawrence Bell, Founder Bell Helicopter
-----Original Message-----
From: simpits-tech-bounces@simpits.org
[mailto:simpits-tech-bounces@simpits.org] On Behalf Of Gene Buckle
Sent: Tuesday, February 03, 2009 8:40 AM
To: simpits-tech@simpits.org
Subject: [simpits-tech] OpenCockpits IOCards...
Is there anyone on the list that uses this hardware? I've been trying to
find some documentation on programming this stuff and I'm getting nowhere...
http://www.opencockpits.com/modules.php?op=modload&name= Forums&file=viewtopi
c&topic=4497&forum=1
It's like they're hard of thinking or something. I mean how hard is it to
understand "need programming documentation"? Gaaah!
As you can see in the thread, I've tried one more time for docs... If I
don't get a useful response, they're going to be thrown on the one trick
pony pile (msfs).
g.
--
Proud owner of F-15C 80-0007
http://www.f15sim.com - The only one of its kind.
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page.
Thanks!
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
|
|
| | | | | | |
| Re: [simpits-tech] OpenCockpits IOCards... [message #70 is a reply to message #69 ] |
Wed, 04 February 2009 03:11 |
Rick Davis
Messages: 128
Registered: January 2009 |
Senior Member |
|
|
Thanks Gene,
I'll try to get them up to you sometime today.
Rick
----- Original Message -----
From: "Gene Buckle" <geneb@deltasoft.com>
To: "Simulator Cockpit Builder's List" <simpits-tech@simpits.org>
Sent: Tuesday, February 03, 2009 10:08 PM
Subject: Re: [simpits-tech] OpenCockpits IOCards...
> On Tue, 3 Feb 2009, Rick Davis wrote:
>
>> Gene,
>>
>> Is there a way to send a couple pics up?
>>
>> I have a couple boards here myself I know nothing about. I have no
>> documentation for them at all. One is photon GPS 530 interface and the
>> other is some sort of GoFlight Card.
>>
>> Thought someone on here may be able to identify them up close.
>>
>
> Rick, you're welcome to email them directly to me and I'll post 'em on the
> blog.
>
> g.
>
> --
> Proud owner of F-15C 80-0007
> http://www.f15sim.com - The only one of its kind.
>
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech@simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above
> page. Thanks!
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
|
|
| |
| Re: [simpits-tech] OpenCockpits IOCards... [message #75 is a reply to message #74 ] |
Wed, 04 February 2009 07:28 |
Timothy James Boldt
Messages: 7
Registered: February 2009 |
Junior Member |
|
|
Michi - I was just going to contact you over @ SimHQ.
Any progress on EEST? I know GlynD was working on it, too.
If I may, I would like a copy of the FAST sourcecode, to play around
with, too. And anything you got from Retro, regarding CommServer.
(And I may need to pick your brain a bit, regarding SIOC. :-) )
Tim
-----Original Message-----
From: simpits-tech-bounces@simpits.org
[mailto:simpits-tech-bounces@simpits.org] On Behalf Of Michael Hirczy
Sent: Wednesday, February 04, 2009 10:19 AM
To: Simulator Cockpit Builder's List
Subject: Re: [simpits-tech] OpenCockpits IOCards...
Gene Buckle wrote:
> Is there anyone on the list that uses this hardware? I've been trying
> to
> find some documentation on programming this stuff and I'm getting
nowhere...
>
> http://www.opencockpits.com/modules.php?op=modload&name= Forums&file=vi
> ewtopic&topic=4497&forum=1
>
> It's like they're hard of thinking or something. I mean how hard is
> it to
> understand "need programming documentation"? Gaaah!
>
> As you can see in the thread, I've tried one more time for docs... If
> I
> don't get a useful response, they're going to be thrown on the one
trick
> pony pile (msfs).
I did a Falcon to SIOC converter software called FAST. Communicating
with the SIOC server is as easy as possible, IMHO. It's just getting and
setting variables, the rest is done in SIOC.
Gene, contact me through mail, I'll send you my sourcecode (although
VB6), hopefully you'll be able to read it ;)
greetings
michi
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above
page. Thanks! No virus found in this incoming message. Checked by AVG -
www.avg.com
Version: 8.0.233 / Virus Database: 270.10.17/1934 - Release Date:
02/04/09 08:24:00
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
|
|
|
| Re: [simpits-tech] OpenCockpits IOCards... [message #76 is a reply to message #74 ] |
Wed, 04 February 2009 07:49 |
Gene Buckle
Messages: 1083
Registered: January 2009 |
Senior Member
Administrator |
|
|
On Wed, 4 Feb 2009, Michael Hirczy wrote:
>
> I did a Falcon to SIOC converter software called FAST. Communicating
> with the SIOC server is as easy as possible, IMHO. It's just getting and
> setting variables, the rest is done in SIOC.
>
Michi, I appriciate the offer, but having SIOC in the middle is exactly
what I don't want. I wanted information on how to program the hardware
directly, without anything between my app and the hardware.
Apparently they are unable or unwilling to provide that documentation.
This basically means that while the IOcards hardware is kind of neat and
potentially useful, it's completely useless for those unwilling or unable
to drink the MSFS/SIOC kool-aide.
g.
--
Proud owner of F-15C 80-0007
http://www.f15sim.com - The only one of its kind.
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
|
|
|
| Re: [simpits-tech] OpenCockpits IOCards... [message #77 is a reply to message #74 ] |
Wed, 04 February 2009 11:21 |
phoenixcomm
Messages: 164
Registered: January 2009
Location: Fort Worth, Tx |
Senior Member |
|
|
Michael Hirczy wrote:
> Gene Buckle wrote:
>
>> Is there anyone on the list that uses this hardware? I've been trying to
>> find some documentation on programming this stuff and I'm getting nowhere...
>>
>> http://www.opencockpits.com/modules.php?op=modload&name= Forums&file=viewtopic&topic=4497&forum=1
>>
>> It's like they're hard of thinking or something. I mean how hard is it to
>> understand "need programming documentation"? Gaaah!
>>
>> As you can see in the thread, I've tried one more time for docs... If I
>> don't get a useful response, they're going to be thrown on the one trick
>> pony pile (msfs).
>>
>
>
Nay, Nay said the little red hen, no I use these puppies, I have a bout
10 units (used) they all had to be reprogramed so the usb would work.
but that no problem... and since its programable I/O for my NAV computer
hardware:
http://www.tpub.com/content/ahapache/TM-1-1520-238-T-1/css/T M-1-1520-238-T-1_088.htm
which has been gutted buy all of the displays and switches are there
so I use the card and I program it. you do the keyboard has been rewired
to output 0-D via priorty encoders, and then each switch goes to hex
latch, 2 switches per latch so
1 latch for the two rotary switches
1 latch for the two thumb wheel switches
1 latch the the keyboard it self
the following drives the display
1 latch /decoder 14bit one for each display (mux out)
1 latch / decoder 16 bits for drive (mux out)
a bad sim of it. http://www.phoenixcomm.net/~phnx2000/sim/demo/demo.html
most of what it is is code in C
Cris Harrison
www.phoenixcomm.net/~phnx2000/sim
> I did a Falcon to SIOC converter software called FAST. Communicating
> with the SIOC server is as easy as possible, IMHO. It's just getting and
> setting variables, the rest is done in SIOC.
>
> Gene, contact me through mail, I'll send you my sourcecode (although
> VB6), hopefully you'll be able to read it ;)
>
> greetings
> michi
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech@simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
>
>
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
|
|
|
| Re: [simpits-tech] OpenCockpits IOCards... [message #79 is a reply to message #77 ] |
Wed, 04 February 2009 12:34 |
Gene Buckle
Messages: 1083
Registered: January 2009 |
Senior Member
Administrator |
|
|
On Wed, 4 Feb 2009, Cris Harrison wrote:
> Michael Hirczy wrote:
>> Gene Buckle wrote:
>>
>>> Is there anyone on the list that uses this hardware? I've been trying to
>>> find some documentation on programming this stuff and I'm getting nowhere...
>>>
>>> http://www.opencockpits.com/modules.php?op=modload&name= Forums&file=viewtopic&topic=4497&forum=1
>>>
>>> It's like they're hard of thinking or something. I mean how hard is it to
>>> understand "need programming documentation"? Gaaah!
>>>
>>> As you can see in the thread, I've tried one more time for docs... If I
>>> don't get a useful response, they're going to be thrown on the one trick
>>> pony pile (msfs).
>>>
>>
>>
> Nay, Nay said the little red hen, no I use these puppies, I have a bout
> 10 units (used) they all had to be reprogramed so the usb would work.
> but that no problem... and since its programable I/O for my NAV computer
Did you actually _read_ that thread? The hardware I'm talking about
connects via the parallel port. It has no USB support at all!
/me sends the hen to the rendering plant
g.
--
Proud owner of F-15C 80-0007
http://www.f15sim.com - The only one of its kind.
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
|
|
|
Goto Forum:
Current Time: Wed Jun 19 15:31:17 PDT 2013
Total time taken to generate the page: 0.05265 seconds |
Members
Search
Help
Register
Login
Home
