Simpits International Forum: simpits-tech => [simpits-tech] Gene, it's your fault...

Members

Help

Home

Home » Simpit Discussion » simpits-tech » [simpits-tech] Gene, it's your fault...

Show: Today's Messages :: Show Polls :: Message Navigator

[simpits-tech] Gene, it's your fault... [message #2893]

Tue, 24 April 2012 09:13

pascal
Messages: 5
Registered: April 2012

Junior Member

It's been, say, four or five years I have been lurking on this list. I have
watched many of you build your sims and chat about the tech surrounding
them.

Well, this last week I finally did something about my lurking and it's all
Gene's fault.

I bought my own CNC machine. :D A CRP4848 4'x4' CNC machine kit [1] from
CNC Router Parts (with 3HP water cooled spindle).

Too long have I watched Gene have all the fun with his tools, making things
I can only dream about. Well no longer. I'll have to put it together over
this summer, but I expect to be making chips by mid-summer. Then I'll start
putting all the parts I have been collect for my GA cockpit together.

Oh, on top of that - the CNC is getting its own place to live. We are
building my shop as I write this.

Thanks Gene for the inspiration.

-Freeman

[1] CRP4848 4'x4' CNC Kit -
http://www.cncrouterparts.com/crp4848-4-x-4-machine-kit-p-13 7.html?cPath=29

_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!

Report message to a moderator

Re: [simpits-tech] Gene, it's your fault... [message #2895 is a reply to message #2893 ]

Tue, 24 April 2012 10:07

Gene Buckle
Messages: 1067
Registered: January 2009

Senior Member
Administrator

On Tue, 24 Apr 2012, Freeman P. Pascal IV wrote:

> I bought my own CNC machine. :D A CRP4848 4'x4' CNC machine kit [1] from
> CNC Router Parts (with 3HP water cooled spindle).
>
That's a great little machine Freeman, good buy!

I would _strongly_ suggest that you get either Vectric's VCarve Pro or
Aspire to do your toolpath work. I've used VCP for years and it's
fantastic. It will output code that the Mach3 controller software easily
processes. There's a post-processor specifically for Mach3. When you
want to do real 3D stuff, I'd either upgrade to or just get Aspire - it's
also made by Vectric and is a world class tool.

g.

--
Proud owner of F-15C 80-0007
http://www.f15sim.com - The only one of its kind.
http://www.diy-cockpits.org/coll - Go Collimated or Go Home.
Some people collect things for a hobby. Geeks collect hobbies.

ScarletDME - The red hot Data Management Environment
A Multi-Value database for the masses, not the classes.
http://www.scarletdme.org - Get it _today_!

Buying desktop hardware and installing a server OS doesn't make a
server-class system any more than sitting in a puddle makes you a duck.
[Cipher in a.s.r]
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!

Report message to a moderator

Re: [simpits-tech] Gene, it's your fault... [message #2900 is a reply to message #2893 ]

Tue, 24 April 2012 20:37

dabigboy
Messages: 208
Registered: September 2010

Senior Member

---- "Freeman P. Pascal IV" <pascal@pascal.org> wrote:
> It's been, say, four or five years I have been lurking on this list. I have
> watched many of you build your sims and chat about the tech surrounding
> them.
>
>
>
> Well, this last week I finally did something about my lurking and it's all
> Gene's fault.
>
>
>
> I bought my own CNC machine. :D A CRP4848 4'x4' CNC machine kit [1] from
> CNC Router Parts (with 3HP water cooled spindle).
<snip>

That is awesome, way to go! I can only imagine the good stuff I could build with a CNC machine. Of course now you have to post pics and details on your new projects as they develop. :)

Matt
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!

Report message to a moderator

Previous Topic:	[simpits-tech] Now it's serious............
Next Topic:	[simpits-tech] It's stuff like this that kills me...

Goto Forum:

-=] Back to Top [=-

[ Generate printable PDF ] [ Syndicate this forum (XML) ] [

]

Current Time: Sun May 19 20:21:53 PDT 2013

Total time taken to generate the page: 0.49078 seconds

.:: Contact :: Home ::.