| [simpits-tech] Fwd: Wayne - you here ??? (fwd) [message #2587] |
Mon, 19 December 2011 13:59  |
 Gene Buckle
Messages: 1083
Registered: January 2009 |
Senior Member
Administrator |
|
|
Frank -
How are you driving the four channels? By the different resolution on the
forward screen, is it safe to assume you're driving
it as at least two 'logical' displays?
I also notice that you list non-square resolutions on each screen. Are
you using non-square screens, or just a square portion
of the image?
I haven't found a way to get rid of the borders, but if you run in
full-screen mode, they're only one pixel wide, and they're
black on all but the 'active' window. There is a small catch - unless one
of the windows is associated with a 2d cockpit view,
FSX will configure at least one window to full-screen. I usually get
around this by defining a 2d cockpit view with a small
window and small 2d cockpit, located somewhere unobtrusive (if you're only
using the square center portion of each display, the
unused space between windows is perfect for this), set to active. Once
this is done, you need only to set your projector's zoom
to place the borders just outside of the actual screen area, and you'll
never notice them.
Conveniently, the correct zoom for a 90° window is 0.302 - close enough
to the 0.30 minimum that you shouldn't have to worry
about editing the .flt file directly.
Let me know if you have any more questions -
-Wayne
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
|
|
|
| Re: [simpits-tech] Fwd: Wayne - you here ??? (fwd) [message #2588 is a reply to message #2587 ] |
Mon, 19 December 2011 14:22  |
Frank Riedel
Messages: 58
Registered: January 2009 |
Member |
|
|
Wayne
Thanks for getting back ;o)
I use 1024x768 on all channel
2 desktop, the one of them on TH2G and yes... the border ... its no a prob
in my setup
there are solutions for this.... but the front dont match the left and
right side
please see this video http://dl.dropbox.com/u/4105723/VIDEO0071.3gp
Zoom is set to 0.3 on all windows left, front, right and Up
anyway cool setup ;o)
2011/12/19 Gene Buckle <geneb@deltasoft.com>
> Frank -
> How are you driving the four channels? By the different resolution on the
> forward screen, is it safe to assume you're driving
> it as at least two 'logical' displays?
>
>
> I also notice that you list non-square resolutions on each screen. Are
> you using non-square screens, or just a square portion
> of the image?
>
> I haven't found a way to get rid of the borders, but if you run in
> full-screen mode, they're only one pixel wide, and they're
> black on all but the 'active' window. There is a small catch - unless one
> of the windows is associated with a 2d cockpit view,
> FSX will configure at least one window to full-screen. I usually get
> around this by defining a 2d cockpit view with a small
> window and small 2d cockpit, located somewhere unobtrusive (if you're only
> using the square center portion of each display, the
> unused space between windows is perfect for this), set to active. Once
> this is done, you need only to set your projector's zoom
> to place the borders just outside of the actual screen area, and you'll
> never notice them.
>
> Conveniently, the correct zoom for a 90° window is 0.302 - close enough
> to the 0.30 minimum that you shouldn't have to worry
> about editing the .flt file directly.
>
> Let me know if you have any more questions -
> -Wayne
>
>
>
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech@simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above
> page. Thanks!
>
--
*Kindly Regards*
*Rezultat*
*Frank Riedel*
Cell: +45 2424 4169
www.rezultat.dk
www.f16simulator.com
www.you-fly.dk
*YouTube VideoChannel*
www.youtube.com/REZULTATdk
www.youtube.com/F16SIMULATORcom
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
|
|
|
Members
Search
Help
Register
Login
Home
