|
|
| Re: [simpits-tech] Prepar3D OTW in "CAVE" [message #2573 is a reply to message #2571 ] |
Sun, 18 December 2011 14:25   |
 Sean Galbraith
Messages: 258
Registered: February 2009 |
Senior Member |
|
|
I would have 2 suggestions, one cheap, the other not :-)
First, try using your projector remote image shift/frequency controls to
make the image larger than it can project. I have used this before to
do exactly what you are trying to achieve. The controls you are looking
for are normally called "image shift", or something like. The "shift"
moves it, then there is normally a "freq" control which stretches, so
shift left and stretch right should loose the left and right edges, then
the same for top and bottom (I have only used it for left/right
adjustments....)
The other way would be to use SOL7 to do the same thing, i.e. move the
image so that the edges don't show...
SeanG
________________________________
From: simpits-tech-bounces@simpits.org
[mailto:simpits-tech-bounces@simpits.org] On Behalf Of Frank Riedel
Sent: Monday, 19 December 2011 10:53 a.m.
To: Simulator Cockpit Builder's List
Subject: [simpits-tech] Prepar3D OTW in "CAVE"
Any help on removing the Frames around the windows ??
https://lh3.googleusercontent.com/-2mRhvXeiwJ4/Tu5fq0tt7cI/A AAAAAAAAFQ/1
LSM0ILLVoc/s800/IMAG0123.jpg
https://lh4.googleusercontent.com/-QG7OOMw-uu8/Tu5fqkd2azI/A AAAAAAAAFU/q
9JTQIvMd2I/s800/IMAG0117.jpg
https://lh3.googleusercontent.com/-NG1hwbGBFb4/Tu5fqo63x-I/A AAAAAAAAFM/s
k9iglCyt0g/s800/IMAG0118.jpg
https://lh5.googleusercontent.com/-CEzbFcbN0rg/Tu5fskByQ8I/A AAAAAAAAFk/P
qDyJNOPZtw/s800/IMAG0119.jpg
https://lh3.googleusercontent.com/-XLWRLFYOAg4/Tu5fs_O7ALI/A AAAAAAAAFo/1
dyMyLSiNPw/s800/IMAG0121.jpg
Regards
Frank
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
|
|
|
|
| Re: [simpits-tech] Prepar3D OTW in "CAVE" [message #2575 is a reply to message #2571 ] |
Sun, 18 December 2011 17:12 |
Gene Buckle
Messages: 1083
Registered: January 2009 |
Senior Member
Administrator |
|
|
On Sun, 18 Dec 2011, Frank Riedel wrote:
> Any help on removing the Frames around the windows ??
>
> https://lh3.googleusercontent.com/-2mRhvXeiwJ4/Tu5fq0tt7cI/A AAAAAAAAFQ/1LSM0ILLVoc/s800/IMAG0123.jpg
>
Frank, are you running a single machine to do the video or multiple
machines?
g.
--
Proud owner of F-15C 80-0007
http://www.f15sim.com - The only one of its kind.
http://www.diy-cockpits.org/coll - Go Collimated or Go Home.
Some people collect things for a hobby. Geeks collect hobbies.
ScarletDME - The red hot Data Management Environment
A Multi-Value database for the masses, not the classes.
http://www.scarletdme.org - Get it _today_!
Political correctness is a doctrine, fostered by a delusional, illogical
minority, and rabidly promoted by an unscrupulous mainstream media, which
holds forth the proposition that it is entirely possible to pick up a turd
by the clean end.
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
|
|
|
| Re: [simpits-tech] Prepar3D OTW in "CAVE" [message #2576 is a reply to message #2572 ] |
Sun, 18 December 2011 17:14 |
Gene Buckle
Messages: 1083
Registered: January 2009 |
Senior Member
Administrator |
|
|
On Sun, 18 Dec 2011, Joseph Fagner wrote:
> Sure five us a copy of the software and we'll help you out ;-).
> Otherwise it's going to be kind of hard to suggest how to remove the
> border from software none of us are familiar with
Jay, an interesting thing about Prepar3D is that you can get a 2 user dev
license for $10 a month :)
g.
--
Proud owner of F-15C 80-0007
http://www.f15sim.com - The only one of its kind.
http://www.diy-cockpits.org/coll - Go Collimated or Go Home.
Some people collect things for a hobby. Geeks collect hobbies.
ScarletDME - The red hot Data Management Environment
A Multi-Value database for the masses, not the classes.
http://www.scarletdme.org - Get it _today_!
Political correctness is a doctrine, fostered by a delusional, illogical
minority, and rabidly promoted by an unscrupulous mainstream media, which
holds forth the proposition that it is entirely possible to pick up a turd
by the clean end.
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
|
|
|
| Re: [simpits-tech] Prepar3D OTW in "CAVE" [message #2577 is a reply to message #2574 ] |
Sun, 18 December 2011 17:16 |
Gene Buckle
Messages: 1083
Registered: January 2009 |
Senior Member
Administrator |
|
|
On Mon, 19 Dec 2011, Sean Galbraith wrote:
> Well, sign up to P3D as a developer and you can play with it too ;-)
> But it's the same in general terms as FSX...
>
Performance has been improved though. When the next version comes out, it
should be a ton faster as well as being DX10 compliant.
g.
--
Proud owner of F-15C 80-0007
http://www.f15sim.com - The only one of its kind.
http://www.diy-cockpits.org/coll - Go Collimated or Go Home.
Some people collect things for a hobby. Geeks collect hobbies.
ScarletDME - The red hot Data Management Environment
A Multi-Value database for the masses, not the classes.
http://www.scarletdme.org - Get it _today_!
Political correctness is a doctrine, fostered by a delusional, illogical
minority, and rabidly promoted by an unscrupulous mainstream media, which
holds forth the proposition that it is entirely possible to pick up a turd
by the clean end.
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
|
|
|
| Re: [simpits-tech] Prepar3D OTW in "CAVE" [message #2578 is a reply to message #2571 ] |
Sun, 18 December 2011 20:17 |
wledzian
Messages: 18
Registered: November 2010
Location: Auburn, Wa |
Junior Member |
|
|
|
Run in full-screen mode and set your zoom to place the borders just outside of the physical screen.
|
|
|
Members
Search
Help
Register
Login
Home
