Home » Simpit Discussion » simpits-tech » [simpits-tech] Leo's BU036 and encoders
|
| Re: [simpits-tech] Leo's BU036 and encoders [message #2406 is a reply to message #2405 ] |
Sat, 20 August 2011 07:54   |
 Gene Buckle
Messages: 1071
Registered: January 2009 |
Senior Member
Administrator |
|
|
On Sat, 20 Aug 2011, Sean Galbraith wrote:
>>
>> Well fortunately radio stacks typically only take two dual encoders,
> so it
>> won't be that bad, but still..
>
> Well even more fortunately *my* radio tuning unit uses just one dual
> encoder.. select, and adjust :)
>
So you're using the one encoder to cover NAV1/NAV2 and COM1/COM2? Got a
pic of the panel? :)
g.
--
Proud owner of F-15C 80-0007
http://www.f15sim.com - The only one of its kind.
http://www.simpits.org/geneb - The Me-109F/X Project
Some people collect things for a hobby. Geeks collect hobbies.
ScarletDME - The red hot Data Management Environment
A Multi-Value database for the masses, not the classes.
http://www.scarletdme.org - Get it _today_!
Political correctness is a doctrine, fostered by a delusional, illogical
minority, and rabidly promoted by an unscrupulous mainstream media, which
holds forth the proposition that it is entirely possible to pick up a turd
by the clean end.
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
|
|
|
| Re: [simpits-tech] Leo's BU036 and encoders [message #2504 is a reply to message #2402 ] |
Fri, 30 September 2011 03:38 |
Jim Sturcbecher
Messages: 12
Registered: August 2009 |
Junior Member |
|
|
Hi all,
Going back a month, I remembered the posts regarding encoders.
I don't know if it will help, but I was digging through some of my
spares bins when I found a box of encoders. These are cheap mechanical
types almost identical to:
http://www.mouser.com/catalog/specsheets/EC11B15243BD%20Draw ing.pdf
These are 30 detent, metal through-panel mount, 6mm metal shaft,
2-phase plus common output with two pins for momentary NO push switch.
I have 60 of these which I shall list in packs of five.
If anyone is interested I will be putting these on eBay this weekend.
If there is any interest, I shall post the link when they are listed.
Jim.
-----Original Message-----
From: simpits-tech-bounces@simpits.org
[mailto:simpits-tech-bounces@simpits.org] On Behalf Of Gene Buckle
Sent: 19 August 2011 15:38
To: Simulator Cockpit Builder's List
Subject: Re: [simpits-tech] Leo's BU036 and encoders
On Sat, 20 Aug 2011, Sean Galbraith wrote:
> Update,,, appears to be an ALPS EC11G.... which I am having trouble
> finding any sources for....
>
http://www.mouser.com/ProductDetail/ALPS/EC11EBB24C03/?qs=sG AEpiMZZMsWp46O%2
52bq11WbJRzXHpSzpXEtpZRbRKg1s%3d
The EC11E series is apparently the replacement line, but the 100 they
ordered won't be shipped to Mouser until the 27th of Oct...
g.
--
Proud owner of F-15C 80-0007
http://www.f15sim.com - The only one of its kind.
http://www.simpits.org/geneb - The Me-109F/X Project
Some people collect things for a hobby. Geeks collect hobbies.
ScarletDME - The red hot Data Management Environment
A Multi-Value database for the masses, not the classes.
http://www.scarletdme.org - Get it _today_!
Political correctness is a doctrine, fostered by a delusional, illogical
minority, and rabidly promoted by an unscrupulous mainstream media, which
holds forth the proposition that it is entirely possible to pick up a turd
by the clean end.
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page.
Thanks!
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
|
|
|
| Re: [simpits-tech] Leo's BU036 and encoders [message #2505 is a reply to message #2504 ] |
Fri, 30 September 2011 06:41 |
Gene Buckle
Messages: 1071
Registered: January 2009 |
Senior Member
Administrator |
|
|
On Fri, 30 Sep 2011, Jim Sturcbecher wrote:
> Hi all,
>
> If anyone is interested I will be putting these on eBay this weekend.
> If there is any interest, I shall post the link when they are listed.
>
Yes, please post the link!
g.
--
Proud owner of F-15C 80-0007
http://www.f15sim.com - The only one of its kind.
http://http://www.diy-cockpits.org/coll - Go Collimated or Go Home.
Some people collect things for a hobby. Geeks collect hobbies.
ScarletDME - The red hot Data Management Environment
A Multi-Value database for the masses, not the classes.
http://www.scarletdme.org - Get it _today_!
Political correctness is a doctrine, fostered by a delusional, illogical
minority, and rabidly promoted by an unscrupulous mainstream media, which
holds forth the proposition that it is entirely possible to pick up a turd
by the clean end.
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
|
|
|
| [simpits-tech] Rotary Encoders for sale [message #2507 is a reply to message #2505 ] |
Fri, 30 September 2011 10:29 |
Jim Sturcbecher
Messages: 12
Registered: August 2009 |
Junior Member |
|
|
Hi all,
lots of small rotary encoders for radio heads etc. I have now
listed these on eBay. Please click the link.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&Item=25090 2094221
Happy shopping,
Jim.
-----Original Message-----
From: simpits-tech-bounces@simpits.org
[mailto:simpits-tech-bounces@simpits.org] On Behalf Of Gene Buckle
Sent: 30 September 2011 15:41
To: Simulator Cockpit Builder's List
Subject: Re: [simpits-tech] Leo's BU036 and encoders
On Fri, 30 Sep 2011, Jim Sturcbecher wrote:
> Hi all,
>
> If anyone is interested I will be putting these on eBay this weekend.
> If there is any interest, I shall post the link when they are listed.
>
Yes, please post the link!
g.
--
Proud owner of F-15C 80-0007
http://www.f15sim.com - The only one of its kind.
http://http://www.diy-cockpits.org/coll - Go Collimated or Go Home.
Some people collect things for a hobby. Geeks collect hobbies.
ScarletDME - The red hot Data Management Environment
A Multi-Value database for the masses, not the classes.
http://www.scarletdme.org - Get it _today_!
Political correctness is a doctrine, fostered by a delusional, illogical
minority, and rabidly promoted by an unscrupulous mainstream media, which
holds forth the proposition that it is entirely possible to pick up a turd
by the clean end.
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page.
Thanks!
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
|
|
|
| Re: [simpits-tech] Rotary Encoders for sale [message #2508 is a reply to message #2507 ] |
Fri, 30 September 2011 11:15 |
Gene Buckle
Messages: 1071
Registered: January 2009 |
Senior Member
Administrator |
|
|
On Fri, 30 Sep 2011, Jim Sturcbecher wrote:
> Hi all,
>
> lots of small rotary encoders for radio heads etc. I have now
> listed these on eBay. Please click the link.
>
> http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&Item=25090 2094221
>
$20 *each*?
g.
--
Proud owner of F-15C 80-0007
http://www.f15sim.com - The only one of its kind.
http://http://www.diy-cockpits.org/coll - Go Collimated or Go Home.
Some people collect things for a hobby. Geeks collect hobbies.
ScarletDME - The red hot Data Management Environment
A Multi-Value database for the masses, not the classes.
http://www.scarletdme.org - Get it _today_!
Political correctness is a doctrine, fostered by a delusional, illogical
minority, and rabidly promoted by an unscrupulous mainstream media, which
holds forth the proposition that it is entirely possible to pick up a turd
by the clean end.
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
|
|
|
| Re: [simpits-tech] Rotary Encoders for sale [message #2509 is a reply to message #2508 ] |
Fri, 30 September 2011 11:48 |
david
Messages: 36
Registered: September 2010 |
Member |
|
|
$20 for 5
At 11:15 AM 9/30/2011 -0700, you wrote:
>On Fri, 30 Sep 2011, Jim Sturcbecher wrote:
>
> > Hi all,
> >
> > lots of small rotary encoders for radio heads etc. I have now
> > listed these on eBay. Please click the link.
> >
> > http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&Item=25090 2094221
> >
>$20 *each*?
>
>g.
>
>--
>Proud owner of F-15C 80-0007
>http://www.f15sim.com - The only one of its kind.
>http://http://www.diy-cockpits.org/coll - Go Collimated or Go Home.
>Some people collect things for a hobby. Geeks collect hobbies.
>
>ScarletDME - The red hot Data Management Environment
>A Multi-Value database for the masses, not the classes.
>http://www.scarletdme.org - Get it _today_!
>
>Political correctness is a doctrine, fostered by a delusional, illogical
>minority, and rabidly promoted by an unscrupulous mainstream media, which
>holds forth the proposition that it is entirely possible to pick up a turd
>by the clean end.
>_______________________________________________
>Simpits-tech mailing list
>Simpits-tech@simpits.org
>http://www.simpits.org/mailman/listinfo/simpits-tech
>To unsubscribe, please see the instructions at the bottom of the
>above page. Thanks!
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
|
|
|
| Re: [simpits-tech] Rotary Encoders for sale [message #2510 is a reply to message #2509 ] |
Fri, 30 September 2011 12:00 |
Jim Sturcbecher
Messages: 12
Registered: August 2009 |
Junior Member |
|
|
Correct!
$20.00 for a pack of five! = $4.00 each.
Jim.
-----Original Message-----
From: simpits-tech-bounces@simpits.org
[mailto:simpits-tech-bounces@simpits.org] On Behalf Of David C. Allen
Sent: 30 September 2011 20:49
To: Simulator Cockpit Builder's List
Subject: Re: [simpits-tech] Rotary Encoders for sale
$20 for 5
At 11:15 AM 9/30/2011 -0700, you wrote:
>On Fri, 30 Sep 2011, Jim Sturcbecher wrote:
>
> > Hi all,
> >
> > lots of small rotary encoders for radio heads etc. I have now
> > listed these on eBay. Please click the link.
> >
> > http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&Item=25090 2094221
> >
>$20 *each*?
>
>g.
>
>--
>Proud owner of F-15C 80-0007
>http://www.f15sim.com - The only one of its kind.
>http://http://www.diy-cockpits.org/coll - Go Collimated or Go Home.
>Some people collect things for a hobby. Geeks collect hobbies.
>
>ScarletDME - The red hot Data Management Environment
>A Multi-Value database for the masses, not the classes.
>http://www.scarletdme.org - Get it _today_!
>
>Political correctness is a doctrine, fostered by a delusional, illogical
>minority, and rabidly promoted by an unscrupulous mainstream media, which
>holds forth the proposition that it is entirely possible to pick up a turd
>by the clean end.
>_______________________________________________
>Simpits-tech mailing list
>Simpits-tech@simpits.org
>http://www.simpits.org/mailman/listinfo/simpits-tech
>To unsubscribe, please see the instructions at the bottom of the
>above page. Thanks!
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page.
Thanks!
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
|
|
|
| Re: [simpits-tech] Rotary Encoders for sale [message #2511 is a reply to message #2509 ] |
Fri, 30 September 2011 12:15 |
Gene Buckle
Messages: 1071
Registered: January 2009 |
Senior Member
Administrator |
|
|
On Fri, 30 Sep 2011, David C. Allen wrote:
> $20 for 5
>
...and had I read further down the page, I would have noticed that.
*facepalm*
:)
g.
--
Proud owner of F-15C 80-0007
http://www.f15sim.com - The only one of its kind.
http://http://www.diy-cockpits.org/coll - Go Collimated or Go Home.
Some people collect things for a hobby. Geeks collect hobbies.
ScarletDME - The red hot Data Management Environment
A Multi-Value database for the masses, not the classes.
http://www.scarletdme.org - Get it _today_!
Political correctness is a doctrine, fostered by a delusional, illogical
minority, and rabidly promoted by an unscrupulous mainstream media, which
holds forth the proposition that it is entirely possible to pick up a turd
by the clean end.
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
|
|
| |
| Re: [simpits-tech] Rotary Encoders for sale [message #2513 is a reply to message #2512 ] |
Fri, 30 September 2011 13:28 |
Jim Sturcbecher
Messages: 12
Registered: August 2009 |
Junior Member |
|
|
That's OK Gene. I have updated the listing title for the
more visually impaired amongst us. 8-)
Jim
-----Original Message-----
From: simpits-tech-bounces@simpits.org
[mailto:simpits-tech-bounces@simpits.org] On Behalf Of Gene Buckle
Sent: 30 September 2011 21:16
To: Simulator Cockpit Builder's List
Subject: Re: [simpits-tech] Rotary Encoders for sale
On Fri, 30 Sep 2011, Jim Sturcbecher wrote:
> Correct!
>
> $20.00 for a pack of five! = $4.00 each.
>
Thanks Jim. I'm apparently hard of reading today. :)
g.
--
Proud owner of F-15C 80-0007
http://www.f15sim.com - The only one of its kind.
http://http://www.diy-cockpits.org/coll - Go Collimated or Go Home.
Some people collect things for a hobby. Geeks collect hobbies.
ScarletDME - The red hot Data Management Environment
A Multi-Value database for the masses, not the classes.
http://www.scarletdme.org - Get it _today_!
Political correctness is a doctrine, fostered by a delusional, illogical
minority, and rabidly promoted by an unscrupulous mainstream media, which
holds forth the proposition that it is entirely possible to pick up a turd
by the clean end.
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page.
Thanks!
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
|
|
|
| Re: [simpits-tech] Rotary Encoders for sale [message #2514 is a reply to message #2513 ] |
Sat, 01 October 2011 02:31 |
Jim Sturcbecher
Messages: 12
Registered: August 2009 |
Junior Member |
|
|
Hi all,
just some additional info on the rotary encoders that I have listed on eBay.
On an earlier post regarding Leo's BU036 and encoders, reference was made to
the Sparkfun encoders:
http://www.sparkfun.com/products/9117
These are the same in function to mine except that the Sparkfun version has
a plastic shaft instead of metal and the shaft length is insufficient to go
through a 1mm mounting panel plus a 6mm light-plate and still be able to
mount a knob, let alone have enough space left to be able to utilise the
push-button. My listed version will allow all this to work without problems.
I have used them myself on my B737-800 overhead on the pressurisation
module. They also work great on the MCP.
Jim.
-----Original Message-----
From: simpits-tech-bounces@simpits.org
[mailto:simpits-tech-bounces@simpits.org] On Behalf Of Jim Sturcbecher
Sent: 30 September 2011 22:29
To: 'Simulator Cockpit Builder's List'
Subject: Re: [simpits-tech] Rotary Encoders for sale
That's OK Gene. I have updated the listing title for the
more visually impaired amongst us. 8-)
Jim
-----Original Message-----
From: simpits-tech-bounces@simpits.org
[mailto:simpits-tech-bounces@simpits.org] On Behalf Of Gene Buckle
Sent: 30 September 2011 21:16
To: Simulator Cockpit Builder's List
Subject: Re: [simpits-tech] Rotary Encoders for sale
On Fri, 30 Sep 2011, Jim Sturcbecher wrote:
> Correct!
>
> $20.00 for a pack of five! = $4.00 each.
>
Thanks Jim. I'm apparently hard of reading today. :)
g.
--
Proud owner of F-15C 80-0007
http://www.f15sim.com - The only one of its kind.
http://http://www.diy-cockpits.org/coll - Go Collimated or Go Home.
Some people collect things for a hobby. Geeks collect hobbies.
ScarletDME - The red hot Data Management Environment
A Multi-Value database for the masses, not the classes.
http://www.scarletdme.org - Get it _today_!
Political correctness is a doctrine, fostered by a delusional, illogical
minority, and rabidly promoted by an unscrupulous mainstream media, which
holds forth the proposition that it is entirely possible to pick up a turd
by the clean end.
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page.
Thanks!
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page.
Thanks!
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
|
|
|
| Re: [simpits-tech] Rotary Encoders for sale [message #2523 is a reply to message #2512 ] |
Mon, 10 October 2011 12:34 |
Jim Sturcbecher
Messages: 12
Registered: August 2009 |
Junior Member |
|
|
I'm surprised that after the complaints about decoder prices, nobody was
interested in the eBay listing. I have relisted the decoders that I have,
and added the opportunity to make an offer on them. Here is the new link:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=25090 8248259&ssPageName=A
DME:L:LCA:US:1123
Jim.
-----Original Message-----
From: simpits-tech-bounces@simpits.org
[mailto:simpits-tech-bounces@simpits.org] On Behalf Of Gene Buckle
Sent: 30 September 2011 21:16
To: Simulator Cockpit Builder's List
Subject: Re: [simpits-tech] Rotary Encoders for sale
On Fri, 30 Sep 2011, Jim Sturcbecher wrote:
> Correct!
>
> $20.00 for a pack of five! = $4.00 each.
>
Thanks Jim. I'm apparently hard of reading today. :)
g.
--
Proud owner of F-15C 80-0007
http://www.f15sim.com - The only one of its kind.
http://http://www.diy-cockpits.org/coll - Go Collimated or Go Home.
Some people collect things for a hobby. Geeks collect hobbies.
ScarletDME - The red hot Data Management Environment
A Multi-Value database for the masses, not the classes.
http://www.scarletdme.org - Get it _today_!
Political correctness is a doctrine, fostered by a delusional, illogical
minority, and rabidly promoted by an unscrupulous mainstream media, which
holds forth the proposition that it is entirely possible to pick up a turd
by the clean end.
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page.
Thanks!
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
|
|
|
| Re: [simpits-tech] Rotary Encoders for sale [message #2524 is a reply to message #2523 ] |
Mon, 10 October 2011 12:45 |
LawnDart
Messages: 94
Registered: March 2009
Location: Seattle, WA |
Member |
|
|
I think that speaks to the broader issue that simming has basically come to a grinding halt in the US as financial priorities shift. :-(
----- Original Message -----
From: "Jim Sturcbecher" <jimsturs@xs4all.nl>
To: "Simulator Cockpit Builder's List" <simpits-tech@simpits.org>
Sent: Monday, October 10, 2011 12:34:08 PM
Subject: Re: [simpits-tech] Rotary Encoders for sale
I'm surprised that after the complaints about decoder prices, nobody was
interested in the eBay listing. I have relisted the decoders that I have,
and added the opportunity to make an offer on them. Here is the new link:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=25090 8248259&ssPageName=A
DME:L:LCA:US:1123
Jim.
-----Original Message-----
From: simpits-tech-bounces@simpits.org
[mailto:simpits-tech-bounces@simpits.org] On Behalf Of Gene Buckle
Sent: 30 September 2011 21:16
To: Simulator Cockpit Builder's List
Subject: Re: [simpits-tech] Rotary Encoders for sale
On Fri, 30 Sep 2011, Jim Sturcbecher wrote:
> Correct!
>
> $20.00 for a pack of five! = $4.00 each.
>
Thanks Jim. I'm apparently hard of reading today. :)
g.
--
Proud owner of F-15C 80-0007
http://www.f15sim.com - The only one of its kind.
http://http://www.diy-cockpits.org/coll - Go Collimated or Go Home.
Some people collect things for a hobby. Geeks collect hobbies.
ScarletDME - The red hot Data Management Environment
A Multi-Value database for the masses, not the classes.
http://www.scarletdme.org - Get it _today_!
Political correctness is a doctrine, fostered by a delusional, illogical
minority, and rabidly promoted by an unscrupulous mainstream media, which
holds forth the proposition that it is entirely possible to pick up a turd
by the clean end.
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page.
Thanks!
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
Ray
www.EllieAvionics.com
|
|
|
Goto Forum:
Current Time: Thu May 23 12:55:00 PDT 2013
Total time taken to generate the page: 0.05110 seconds |
Members
Search
Help
Register
Login
Home
