|
|
| Re: [simpits-tech] Pedals are in...... [message #2912 is a reply to message #2909 ] |
Sat, 28 April 2012 07:38   |
 Sean Galbraith
Messages: 251
Registered: February 2009 |
Senior Member |
|
|
After living on a diet of airliner bits, it always surprises me how
simple GA controls are.....
Nice work!
SeanG
> -----Original Message-----
> From: simpits-tech-bounces@simpits.org [mailto:simpits-tech-
> bounces@simpits.org] On Behalf Of Gene Buckle
> Sent: Saturday, 28 April 2012 2:01 a.m.
> To: Simulator Cockpit Builder's List
> Subject: Re: [simpits-tech] Pedals are in......
>
> On Thu, 26 Apr 2012, dabigboy@cox.net wrote:
>
> > Real pedals from a Cessna 172RG (Cutlass), fully articulating, with
toe
> brakes:
> >
> > http://www.flickr.com/photos/alfamatt/6971757524/
> >
> \o/
>
> g.
>
> --
> Proud owner of F-15C 80-0007
> http://www.f15sim.com - The only one of its kind.
> http://www.diy-cockpits.org/coll - Go Collimated or Go Home.
> Some people collect things for a hobby. Geeks collect hobbies.
>
> ScarletDME - The red hot Data Management Environment
> A Multi-Value database for the masses, not the classes.
> http://www.scarletdme.org - Get it _today_!
>
> Buying desktop hardware and installing a server OS doesn't make a
> server-class system any more than sitting in a puddle makes you a
duck.
> [Cipher in a.s.r]
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech@simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above
> page. Thanks!
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
|
|
|
|
|
| Re: [simpits-tech] Pedals are in...... [message #2915 is a reply to message #2914 ] |
Sat, 28 April 2012 18:22 |
delor lauchang
Messages: 52
Registered: January 2009 |
Member |
|
|
LOL....
On Apr 28, 2012 4:28 PM, "Ben Jones" <bjones@pipecomp.com.au> wrote:
> Aircraft don't need brakes to fly :)
> Ben
>
>
>
>
>
> Thanks! Yep, I was a bit surprised at the simplicity (and, frankly, the
> flimsiness) of this rudder system. It's a bit unnerving to see that it
> would only take the failure of a single bolt to disable one of the
> brakes.... =O
>
> I think it took me all of 45 minutes to actually align and mount the
> pedals into my custom frame.
>
> Today I flew a Cessna 150 and I had a peek behind the pedals after
> parking...sure enough, it appears to be exactly the same setup. There was
> the little bolt and nut assembly to secure the pedal to its attachment
> shaft, and the mounting angles and dimensions of the pedals appear to be
> the same (though I am guessing the two sets of pedals are closer together
> on the 150 vs the 172RG that my pedals came from).
>
> Matt
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech@simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above
> page. Thanks!
>
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
|
|
|
| Re: [simpits-tech] Pedals are in...... [message #2916 is a reply to message #2913 ] |
Sat, 28 April 2012 19:14 |
phoenixcomm
Messages: 164
Registered: January 2009
Location: Fort Worth, Tx |
Senior Member |
|
|
On 4/28/2012 4:16 PM, dabigboy@cox.net wrote:
> ---- Sean Galbraith<Sean.Galbraith@pacificsimulators.com> wrote:
>> After living on a diet of airliner bits, it always surprises me how
>> simple GA controls are.....
>>
>> Nice work!
>>
>> SeanG
> Thanks! Yep, I was a bit surprised at the simplicity (and, frankly, the flimsiness) of this rudder system. It's a bit unnerving to see that it would only take the failure of a single bolt to disable one of the brakes.... =O
>
> I think it took me all of 45 minutes to actually align and mount the pedals into my custom frame.
>
> Today I flew a Cessna 150 and I had a peek behind the pedals after parking...sure enough, it appears to be exactly the same setup. There was the little bolt and nut assembly to secure the pedal to its attachment shaft, and the mounting angles and dimensions of the pedals appear to be the same (though I am guessing the two sets of pedals are closer together on the 150 vs the 172RG that my pedals came from).
>
> Matt
hey Matt
check out pedals that I have... Instead of the stupid hardware and bolts
as a pivot (they dont do that function well) use two air cylinders and
cross connect them.. you should know that they will self center as they
follow the laws of fluid dynamics....
http://phoenixcomm.wordpress.com/projects/pilot-controls-gro up/rudder-pedals/
you can use pedals that have to brakes on them if you want them..
you can pick up some pedals on ebay.. for less than 150 bucks
Cris H.
phoenixcomm.wordpress.com
www.phoenixaerospace.us
www.flite-tronics.com
> _______________________________________________
> Simpits-tech mailing list
> Simpits-tech@simpits.org
> http://www.simpits.org/mailman/listinfo/simpits-tech
> To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
>
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
|
|
|
Members
Search
Help
Register
Login
Home
