| [simpits-tech] diode for 24v dc [message #2411] |
Sun, 21 August 2011 17:17  |
 Justin Messenger
Messages: 160
Registered: January 2009 |
Senior Member |
|
|
Anyone have a tip on what diode I would need for a DC 24v light bulb project? I have two generator lights and a bus tie light, the bus tie should come on if either gen light illuminates. I want to run power from each gen light to the bus tie light so that if a gen light comes on the bus ties will also illuminate. The diode is needed to keep the other gen light off unless the computer output activates the other gen light.
www.SimAdventure.com
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
Phantoms Phorever!!
|
|
|
| Re: [simpits-tech] diode for 24v dc [message #2413 is a reply to message #2411 ] |
Mon, 22 August 2011 02:20  |
Ben Jones
Messages: 40
Registered: March 2009 |
Member |
|
|
How much juice(amps) do you need to push through the diode ??
From: simpits-tech-bounces@simpits.org
[mailto:simpits-tech-bounces@simpits.org] On Behalf Of Justin Messenger
Sent: Monday, 22 August 2011 8:18 AM
To: Simpits Tech
Subject: [simpits-tech] diode for 24v dc
Anyone have a tip on what diode I would need for a DC 24v light bulb
project? I have two generator lights and a bus tie light, the bus tie
should come on if either gen light illuminates. I want to run power from
each gen light to the bus tie light so that if a gen light comes on the
bus ties will also illuminate. The diode is needed to keep the other gen
light off unless the computer output activates the other gen light.
www.SimAdventure.com
_______________________________________________
Simpits-tech mailing list
Simpits-tech@simpits.org
http://www.simpits.org/mailman/listinfo/simpits-tech
To unsubscribe, please see the instructions at the bottom of the above page. Thanks!
|
|
|
Members
Search
Help
Register
Login
Home
